{"title":"Single Phase Distro","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOur single phase distribution boards (distros) make it quick and tidy to split one incoming supply into multiple protected outputs, ideal for events, site work, workshops, pop-ups, and temporary installs where you need reliable power without the mess.\u003c\/p\u003e","products":[{"product_id":"imst-32a-single-phase-to-6-x-16a-mcb-9030331","title":"PCE IMST Power Distribution Unit 32Amp Single Phase to 6 x 16Amp MCB 9030331","description":"\u003cp data-start=\"29\" data-end=\"394\"\u003eThis IMST 32A single phase distribution board is a simple, professional way to create multiple circuits from a single incoming supply. It is ideal for practical setups where you have lots of smaller loads spread around, such as temporary work areas, cabins and compounds, exhibition stands, workshop bays, plant rooms, control equipment, and general site power.\u003c\/p\u003e\n\u003ch3 data-start=\"396\" data-end=\"410\"\u003eProtection\u003c\/h3\u003e\n\u003cp data-start=\"412\" data-end=\"649\"\u003eThis version uses six separate 16A outlets, each protected by its own 16A MCB (Type C). That means if one circuit is overloaded or develops a short circuit, only that one output trips, helping keep the rest of your setup running.\u003c\/p\u003e\n\u003cp data-start=\"651\" data-end=\"984\"\u003eBecause this model is MCB only, it provides overcurrent and short circuit protection on each output, but it does not provide 30mA RCD personal protection at the outlets. It is best used where the upstream supply already provides the required RCD protection, or where RCD protection is managed elsewhere in the system.\u003c\/p\u003e\n\u003ch3 data-start=\"986\" data-end=\"1006\"\u003eRugged enclosure\u003c\/h3\u003e\n\u003cp data-start=\"1008\" data-end=\"1352\"\u003eThe enclosure is shock resistant polyamide, designed to be tough, lightweight and genuinely portable. It has a folding steel carry handle, a stackable design, and the protective devices sit under a clear window so checks are quick and obvious. Rated IP44, it is suitable for real world temporary use where conditions are not always perfect.\u003c\/p\u003e\n\u003ch3 data-end=\"1372\" data-start=\"1315\"\u003eWhy is this priced lower than similar units elsewhere\u003c\/h3\u003e\n\u003cp data-end=\"1595\" data-start=\"1374\"\u003eWe keep pricing straight forward. We buy in volume, keep overheads lean, and sell direct rather than adding multiple distributor margins. You still get the same specification and a unit that is checked before it leaves us.\u003c\/p\u003e\n\u003ch3 data-start=\"1354\" data-end=\"1367\"\u003eKey specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"1371\" data-end=\"1381\"\u003eInput:\u003c\/strong\u003e 32A, 220 to 250V, single phase, 3 pin (P + N + E) IP44 inlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"1451\" data-end=\"1463\"\u003eOutputs:\u003c\/strong\u003e 6 × 16A, 220 to 250V, IP44 sockets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"1503\" data-end=\"1518\"\u003eProtection:\u003c\/strong\u003e each output protected by a 16A single pole MCB (Type C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"1579\" data-end=\"1593\"\u003eIP rating:\u003c\/strong\u003e IP44\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"1603\" data-end=\"1612\"\u003eSize:\u003c\/strong\u003e 197 × 285 × 290 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"1636\" data-end=\"1647\"\u003eWeight:\u003c\/strong\u003e 2.8 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PCE","offers":[{"title":"Default Title","offer_id":52103564853590,"sku":"IMST321\/0-6MCB","price":200.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/9030331Top.webp?v=1772668276"},{"product_id":"32a-single-phase-13a-4-way-distribution-board","title":"32Amp Single Phase 13Amp 4 Way Distribution Board","description":"\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003eThe \u003cstrong\u003e321T\/4\u003c\/strong\u003e is a professional grade \u003cstrong\u003e32 amp in, 32 amp out, 4 way 13 amp \u003c\/strong\u003edistribution board built for situations where you need multiple 13 amp outlets from a single supply, but want the extra capacity that comes with a 32 amp feed.\u003c\/p\u003e\n\u003cp\u003eIt suits a wide range of setups, including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorkshops and test areas\u003c\/strong\u003e (multiple tools, chargers, small equipment)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCabins, offices and welfare\u003c\/strong\u003e (kettles, microwaves, heaters, small appliances)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExhibitions and retail\u003c\/strong\u003e (tills, screens, laptop stations, lighting)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSite compounds and temporary installs\u003c\/strong\u003e where you need reliable, repeatable power distribution\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompared with a 16 amp supply, the 32 amp input gives you more available capacity across the outlets, making it the better choice where you’re running more devices at once or you’ve got a mix of loads that could otherwise push a 16 amp feed to its limit.\u003c\/p\u003e\n\u003ch4\u003eBuilt tough for repeated use\u003c\/h4\u003e\n\u003cp\u003eThe enclosure is made from impact resistant polypropylene chosen for hard wearing use, with strong chemical and corrosion resistance. It is designed to be moved, stacked, stored and used repeatedly — a proper upgrade from domestic multiway adapters and extension blocks.\u003c\/p\u003e\n\u003ch4\u003eLoop through makes scaling easy\u003c\/h4\u003e\n\u003cp\u003eWith the 32 amp loop through, you can run additional units or feed onwards neatly from the same supply. It keeps setups tidy and makes expanding socket count straightforward.\u003c\/p\u003e\n\u003ch4\u003eClear “power on” indication\u003c\/h4\u003e\n\u003cp\u003eA green LED power indicator gives an instant visual check that the unit is live.\u003c\/p\u003e\n\u003ch4\u003eWhy there is no RCBO on this unit\u003c\/h4\u003e\n\u003cp\u003eWe often get asked why there isn’t a 30 mA RCBO inside the unit. In most compliant temporary power arrangements (including BS 7909 and BS 7671 practices), single phase supplies are expected to be RCD protected upstream. Adding another 30 mA device here would commonly result in two RCDs in series, which is typically redundant and can create nuisance tripping or confusion. This unit is intended to be used with correct upstream protection already in place.\u003c\/p\u003e\n\u003ch4\u003eIP rating note\u003c\/h4\u003e\n\u003cp\u003eWith the socket covers closed and nothing plugged in, the 13 amp outlets are \u003cstrong\u003eIP44\u003c\/strong\u003e. When plugs are inserted, the sockets are no longer IP44 (as with most 13 amp socket arrangements).\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eKey specs \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput:\u003c\/strong\u003e 32A single phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoop through:\u003c\/strong\u003e 32A single phase (feed additional units \/ expand)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 4 × 13A socket outlets (domestic)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndication:\u003c\/strong\u003e Green LED “power on”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Impact resistant polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP rating:\u003c\/strong\u003e IP44 when covers are closed (not maintained when plugs are inserted)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest for:\u003c\/strong\u003e higher overall 13A demand from one supply (cabins, workshops, exhibitions, compounds)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.9kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 320 × 200 × 110 mm (H × W × D)\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Distro Works","offers":[{"title":"Default Title","offer_id":52103564886358,"sku":"321T\/4","price":140.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/Distro32A-13ATopAngle694.webp?v=1766011714"},{"product_id":"16a-single-phase-13a-4-way-distribution-board","title":"16Amp Single Phase 13Amp 4 Way Distribution Board","description":"\u003cp\u003eThe 161T\/4 is a professional grade 16 amp in, 16 amp out, 4 way 13 amp\u003cstrong\u003e \u003c\/strong\u003edistribution board designed for real world setups where you need multiple low power outlets from a single supply, without relying on domestic multiway adapters.\u003c\/p\u003e\n\u003cp\u003eIt is ideal for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTables and control positions\u003c\/strong\u003e (laptops, screens, chargers, comms gear)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWorkshops and test bays\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOffices, temporary cabins, welfare areas\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRetail and exhibitions\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral site and compound power\u003c\/strong\u003e where you need plenty of 13 amp outlets but not huge loads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBecause it runs from a 16 amp single phase supply, it is a tidy step up from household adaptors and extension leads — you get a purpose built unit made to be moved, stacked, and used repeatedly.\u003c\/p\u003e\n\u003ch4\u003eBuilt tough for repeated use\u003c\/h4\u003e\n\u003cp\u003eThe enclosure is made from impact resistant polypropylene chosen for hard wearing use, with strong chemical and corrosion resistance. It is lightweight, has a small footprint for storage and transport, and is designed to withstand day to day knocks far better than domestic products.\u003c\/p\u003e\n\u003ch4\u003eLoop through makes scaling easy\u003c\/h4\u003e\n\u003cp\u003eThe 16 amp loop through means you can run multiple units from one supply when you need more socket count across an area. It keeps setups tidy and avoids messy chains of domestic extensions.\u003c\/p\u003e\n\u003ch4\u003eClear “power on” indication\u003c\/h4\u003e\n\u003cp\u003eA green LED power indicator shows at a glance that the unit is live.\u003c\/p\u003e\n\u003ch4\u003eWhy there is no RCBO on this unit\u003c\/h4\u003e\n\u003cp\u003eWe are often asked why this product does not include a 30 mA RCBO. In most compliant temporary power setups (including BS 7909 and BS 7671 practices), 16 amp single phase supplies are expected to be protected by a 30 mA RCD upstream. Adding another 30 mA device in this unit would typically put two RCDs in line, which is generally redundant and can introduce nuisance tripping or confusion. This unit is designed to be used with correct upstream protection.\u003c\/p\u003e\n\u003ch4\u003eIP rating note\u003c\/h4\u003e\n\u003cp\u003eWith the socket covers closed and nothing plugged in, the 13 amp outlets are IP44. When plugs are inserted, the sockets are no longer IP44 (as with most 13 amp socket arrangements).\u003c\/p\u003e\n\u003ch4\u003eEasy handling\u003c\/h4\u003e\n\u003cp\u003eThe handle layout is designed for practical carry and transport — in use, a single person can comfortably carry four units using two hands.\u003c\/p\u003e\n\u003ch3\u003eKey specs \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput:\u003c\/strong\u003e 16A single phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoop through:\u003c\/strong\u003e 16A single phase (feed additional units)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 4 × 13A socket outlets (domestic)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndication:\u003c\/strong\u003e Green LED “power on”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Impact resistant polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP rating:\u003c\/strong\u003e IP44 when covers are closed (not maintained when plugs are inserted)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTypical use:\u003c\/strong\u003e lots of low power appliances, laptop tables, exhibitions, workshops, cabins, retail\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.9kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 320 × 200 × 110 mm (H × W × D)\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Distro Works","offers":[{"title":"Default Title","offer_id":52103565082966,"sku":"161T\/4","price":135.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/Distro32A-13ATopAngle694_4707fd2c-1c0c-440b-b692-370cbfc2c99b.webp?v=1766011717"},{"product_id":"32a-single-phase-13a-4-way-distribution-board-black","title":"32Amp Single Phase 13Amp 4 Way Distribution Board (Black)","description":"\u003cp\u003eThe \u003cstrong\u003eM321T\/4\u003c\/strong\u003e is a professional grade \u003cstrong\u003e32 amp in, 32 amp out, 4 way 13 amp \u003c\/strong\u003edistribution board built for real world use where reliability and practicality matter. It is ideal anywhere you need multiple low power outlets from a single supply without resorting to domestic multiway adapters.\u003c\/p\u003e\n\u003cp\u003eIt works brilliantly for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAV and stage setups\u003c\/strong\u003e where you want black connectors to keep everything low visibility\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWorkbenches and test bays\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOffices and temporary workspaces\u003c\/strong\u003e (laptops, screens, chargers, comms gear)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWorkshops, pop up retail, exhibitions, control desks, and site cabins\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBecause it is fed from a 32 amp single phase supply, you have more headroom than a typical 16 amp feed, which makes it a better choice where lots of small devices are used together and you want to reduce the chance of nuisance overloads.\u003c\/p\u003e\n\u003ch4\u003eBuilt to take abuse\u003c\/h4\u003e\n\u003cp\u003eThe enclosure is made from impact resistant polypropylene chosen for hard wearing use, with strong chemical and corrosion resistance. It is designed to be lightweight, easy to store, and tough enough for repeated transport.\u003c\/p\u003e\n\u003ch4\u003eLoop through makes scaling easy\u003c\/h4\u003e\n\u003cp\u003eThe 32 amp loop through lets you run multiple units from one supply when you need more socket count across a wider area, without messy daisy chains of domestic extensions.\u003c\/p\u003e\n\u003ch4\u003eClear “power on” indication\u003c\/h4\u003e\n\u003cp\u003eA green LED power indicator makes it obvious at a glance that the unit is live.\u003c\/p\u003e\n\u003ch4\u003eWhy there is no RCBO on this unit\u003c\/h4\u003e\n\u003cp\u003eWe are often asked why we do not fit a 30 mA RCBO in this product. In most compliant temporary power setups (including BS 7909 and BS 7671 practices),\u003cstrong\u003e \u003c\/strong\u003ea 30 mA RCD is already provided upstream on 16 amp single phase supplies. Adding the same 30 mA device again downstream would typically put two RCDs in line, which is usually redundant and can introduce unnecessary complications. This unit is designed to be used as intended with correct upstream protection.\u003c\/p\u003e\n\u003ch4\u003eIP rating note\u003c\/h4\u003e\n\u003cp\u003eWith socket covers closed and nothing plugged in, the 13 amp outlets are \u003cstrong\u003eIP44\u003c\/strong\u003e. When plugs are in use, the sockets are no longer IP44 (as with most 13 amp socket arrangements).\u003c\/p\u003e\n\u003ch4\u003eEasy handling\u003c\/h4\u003e\n\u003cp\u003eThe handle layout is designed so a user can comfortably carry multiple units at once — in practice, four can be carried using two hands.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eKey specs \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput:\u003c\/strong\u003e 32A single phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoop through:\u003c\/strong\u003e 32A single phase (feed additional units)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 4 × 13A socket outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e Black 32A input and output (stage friendly \/ low visibility)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndication:\u003c\/strong\u003e Green LED “power on”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Impact resistant polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP rating:\u003c\/strong\u003e IP44 when closed (not maintained when plugs are inserted)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTypical use:\u003c\/strong\u003e lots of low power appliances, AV, laptops, control desks, exhibitions, workshops\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.5kg\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e: 320 × 200 × 110 mm (H × W × D)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Distro Works","offers":[{"title":"Default Title","offer_id":52103565345110,"sku":"M321T\/4","price":145.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/DistroWorks3214x13aBlack.png?v=1766011722"},{"product_id":"16a-single-phase-13a-4-way-distribution-board-black","title":"16Amp Single Phase 13Amp 4 Way Distribution Board (Black)","description":"\u003cp\u003eThe \u003cstrong\u003eM161T\/4\u003c\/strong\u003e is a professional grade \u003cstrong\u003e16 amp in, 16 amp out, 4 way 13 amp distribution board\u003c\/strong\u003e built for real world use where reliability and practicality matter. It is ideal anywhere you need multiple low power outlets from a single supply without relying on domestic multiway adapters.\u003c\/p\u003e\n\u003cp\u003eIt works brilliantly for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAV and stage setups\u003c\/strong\u003e where you want black connectors to keep everything low visibility\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWorkbenches and test bays\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOffices and temporary workspaces\u003c\/strong\u003e (laptops, screens, chargers, comms gear)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWorkshops, pop up retail, exhibitions, control desks, and site cabins\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eBecause it is fed from a 16 amp single phase supply, it is a tidy, compliant step up from a household extension lead when you need several small appliances in one place.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eBuilt to take abuse\u003c\/h4\u003e\n\u003cp\u003eThe enclosure is made from impact resistant polypropylene chosen for hard wearing use, with strong chemical and corrosion resistance. It is designed to be lightweight, easy to store, and tough enough for repeated transport.\u003c\/p\u003e\n\u003ch4\u003eLoop through makes scaling easy\u003c\/h4\u003e\n\u003cp\u003eThe 16 amp loop through lets you run multiple units from one supply when you need more socket count across a wider area, without messy daisy chains of domestic extensions.\u003c\/p\u003e\n\u003ch4\u003eClear “power on” indication\u003c\/h4\u003e\n\u003cp\u003eA green LED power indicator makes it obvious at a glance that the unit is live.\u003c\/p\u003e\n\u003ch4\u003eWhy there is no RCBO on this unit\u003c\/h4\u003e\n\u003cp\u003eWe are often asked why we do not fit a 30 mA RCBO in this product. In most compliant temporary power setups (including BS 7909 and BS 7671 practices), a 30 mA RCD is already provided upstream on 16 amp single phase supplies. Adding the same 30 mA device again downstream would typically put\u003cstrong\u003e \u003c\/strong\u003etwo RCDs in line, which is usually \u003cstrong\u003eredundant\u003c\/strong\u003e and can introduce unnecessary complications. This unit is designed to be used as intended with correct upstream protection.\u003c\/p\u003e\n\u003ch4\u003eIP rating note\u003c\/h4\u003e\n\u003cp\u003eWith socket covers closed and nothing plugged in, the 13 amp outlets are IP44. When plugs are in use, the sockets are no longer IP44 (as with most 13 amp socket arrangements).\u003c\/p\u003e\n\u003ch4\u003eEasy handling\u003c\/h4\u003e\n\u003cp\u003eThe handle layout is designed so a user can comfortably carry multiple units at once — in practice, four can be carried using two hands.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eKey specs \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput:\u003c\/strong\u003e 16A single phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoop through:\u003c\/strong\u003e 16A single phase (feed additional units)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 4 × 13A socket outlets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e \u003cstrong\u003eBlack 16A input and output\u003c\/strong\u003e (stage friendly \/ low visibility)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndication:\u003c\/strong\u003e Green LED “power on”\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Impact resistant polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP rating:\u003c\/strong\u003e IP44 when closed (not maintained when plugs are inserted)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTypical use:\u003c\/strong\u003e lots of low power appliances, AV, laptops, control desks, exhibitions, workshops\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.5kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 320 × 200 × 110 mm (H × W × D)\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Distro Works","offers":[{"title":"Default Title","offer_id":52103565377878,"sku":"M161T\/4","price":140.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/DistroWorks1614x13aBlack.webp?v=1766011724"},{"product_id":"imst-32a-single-phase-to-6-x-16a-rcbo","title":"PCE IMST Power Distribution Unit 32Amp Single Phase to 6 x 16Amp RCBO","description":"\u003cp data-start=\"215\" data-end=\"592\"\u003eThis IMST 32A single phase distribution board is a simple, professional way to create multiple safe, protected circuits from a single incoming supply. It is ideal for practical setups where you have lots of smaller loads spread around, such as temporary work areas, cabins and compounds, exhibition stands, workshop bays, plant rooms, control equipment, and general site power.\u003c\/p\u003e\n\u003ch3 data-start=\"594\" data-end=\"608\"\u003eProtection\u003c\/h3\u003e\n\u003cp data-start=\"609\" data-end=\"895\"\u003eInstead of putting everything behind one device, this unit gives you six separate 16A outlets, each protected by its own 16A 30mA two pole RCBO Type A (C curve). That means if one connected item develops a fault or nuisance trip, you only lose that one circuit, not the whole board.\u003c\/p\u003e\n\u003cp data-start=\"897\" data-end=\"1085\"\u003eIt is also a tidy way to avoid background leakage building up across multiple connected items and tripping a single shared RCD, because each outlet has its own RCD protection built in.\u003c\/p\u003e\n\u003ch3 data-start=\"1087\" data-end=\"1107\"\u003eRugged enclosure\u003c\/h3\u003e\n\u003cp data-start=\"1108\" data-end=\"1448\"\u003eThe enclosure is shock resistant polyamide, designed to be tough, lightweight and genuinely portable. It has a folding steel carry handle, a stackable design, and the protective devices sit under a clear window so checks are quick and obvious. Rated IP44, it is suitable for real world temporary use where conditions are not always perfect.\u003c\/p\u003e\n\u003ch3 data-start=\"1450\" data-end=\"1507\"\u003eWhy is this priced lower than similar units elsewhere\u003c\/h3\u003e\n\u003cp data-start=\"1508\" data-end=\"1730\"\u003eWe keep pricing straight forward. We buy in volume, keep overheads lean, and sell direct rather than adding multiple distributor margins. You still get the same specification and a unit that is checked before it leaves us.\u003c\/p\u003e\n\u003ch3 data-start=\"1732\" data-end=\"1745\"\u003eKey specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"1746\" data-end=\"2035\"\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e: 32A, 220 to 250V, single phase, 3 pin (P + N + E) IP44 inlet\u003cbr data-start=\"1813\" data-end=\"1816\"\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1746\" data-end=\"2035\"\u003e\n\u003cstrong\u003eOutputs\u003c\/strong\u003e: 6 × 16A, 220 to 250V, IP44 sockets\u003cbr data-start=\"1859\" data-end=\"1862\"\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1746\" data-end=\"2035\"\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e: each output protected by a 16A 30mA 2 pole RCBO, Type A (C curve)\u003cbr data-start=\"1943\" data-end=\"1946\"\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1746\" data-end=\"2035\"\u003e\n\u003cstrong\u003eIP rating\u003c\/strong\u003e: IP44\u003cbr data-start=\"1961\" data-end=\"1964\"\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1746\" data-end=\"2035\"\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 197 × 285 × 290 mm\u003cbr data-start=\"1988\" data-end=\"1991\"\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1746\" data-end=\"2035\"\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.9 kg\u003cstrong data-start=\"1450\" data-end=\"1460\"\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PCE","offers":[{"title":"Default Title","offer_id":52103569408342,"sku":"IMST321\/0-6RCBO","price":325.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/IMST32A6x16Angle_1b06b4e1-9c72-4eaf-a7cf-e6877604b9c1.webp?v=1766011748"},{"product_id":"32a-single-phase-6x-13a-distribution-board","title":"32Amp Single Phase 6x 13Amp Distribution Board","description":"\u003cp\u003e\u003cstrong\u003eProfessional quality 32A to 6 x 13A loop through distribution board, built for hard use.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the higher capacity version of our popular 13A outlet board. It is designed for situations where you want more headroom on the incoming supply, but still need multiple standard 13A plug in points for low to medium power equipment.\u003c\/p\u003e\n\u003cp\u003eThe 32A input and 32A loop through makes it easy to run multiple units from a single supply when you need more outlets. A green LED power indicator gives a clear visual check that the supply is live.\u003c\/p\u003e\n\u003ch3\u003eRugged enclosure and easy handling\u003c\/h3\u003e\n\u003cp\u003eThe enclosure is made from impact resistant polypropylene chosen for hard wearing use, with strong chemical and corrosion resistance. The compact footprint stacks neatly for storage and transport, and the handle design makes day to day handling quick and safe.\u003c\/p\u003e\n\u003ch3\u003eOutdoor practicality\u003c\/h3\u003e\n\u003cp\u003eThe 13A sockets have covers which give IP44 protection when closed. Once a plug is inserted the socket cover cannot close, so that outlet is no longer IP44.\u003c\/p\u003e\n\u003ch3\u003eAbout RCD protection\u003c\/h3\u003e\n\u003cp\u003eIn many temporary power setups the supply feeding this unit is already protected by a 30mA RCD. Adding another 30mA device inside the board would create two RCDs in line, which is usually redundant and can increase nuisance tripping. For that reason this board is designed to work with correctly protected supplies.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e32A single phase input with 32A loop through for daisy chaining\u003c\/li\u003e\n\u003cli\u003e6 x 13A UK socket outlets with spring covers\u003c\/li\u003e\n\u003cli\u003eGreen LED power indicator\u003c\/li\u003e\n\u003cli\u003eImpact resistant polypropylene enclosure\u003c\/li\u003e\n\u003cli\u003eCompact footprint, easy to store and transport\u003c\/li\u003e\n\u003cli data-start=\"1637\" data-end=\"1932\"\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 402 X 200 × 125 mm (H X W X D )\u003cbr data-start=\"1913\" data-end=\"1916\"\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1637\" data-end=\"1932\"\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.5 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Distro Works","offers":[{"title":"Default Title","offer_id":52103569441110,"sku":"321T\/6","price":160.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/DistroWorks161T_6-1_3.png?v=1772201875"},{"product_id":"16a-single-phase-6-x-13a-distribution-board","title":"16Amp Single Phase 6 x 13Amp Distribution Board","description":"\u003cp\u003e\u003cspan\u003eOur \u003c\/span\u003e16A to 6 × 13A\u003cspan\u003e power distribution board is built for fast, tidy power where you need \u003c\/span\u003elots\u003cspan\u003e of low‑power outlets from a single 16A supply, without the fragility of consumer multi‑plugs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt’s ideal for:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003etemporary workstations (laptops, chargers, small screens)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eexhibition stands and pop‑up retail\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eoffices, classrooms and training rooms\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eworkshops and test benches\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eevents and site cabins\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003eloop‑through 16A outlet\u003cspan\u003e makes it simple to add additional units from the same supply when you need more outlets, keeping cabling cleaner and setups quicker.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eWhy there’s no RCBO in this unit\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eA common question is “Why doesn’t this have an RCBO built in?”\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eUnder \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eBS 7909\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eBS 7671\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, \u003c\/span\u003e16A single‑phase supplies are typically provided with 30mA RCD protection upstream\u003cspan\u003e. Adding another 30mA RCD\/RCBO inside this distro would place \u003c\/span\u003etwo 30mA RCD devices in series\u003cspan\u003e, which is generally redundant and can increase the chance of nuisance tripping.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eDesign and build\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eImpact‑resistant polypropylene\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e housing for hardwearing use and good chemical\/corrosion resistance\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eErgonomic handle design\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e: easy to carry, and the shape allows users to carry \u003c\/span\u003eup to four units using two hands\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eLightweight\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e with a compact footprint for storage and transport\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cstrong\u003eSuitable\u003c\/strong\u003e for floor mounting or suspending (application dependent)\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eGreen LED power indicator\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e shows supply present at a glance\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eIP rating note\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe 13A sockets have covers that bring the outlets to \u003c\/span\u003eIP44 when closed\u003cspan\u003e (not in use). \u003c\/span\u003eOnce plugs are inserted, the 13A outlets are no longer IP44\u003cstrong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eKey specs \u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eInput: \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e16A 230V single phase\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eLoop‑through: \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e16A single phase\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eOutputs: \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e6 × 13A\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e UK sockets\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eIndicator: \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eGreen power LED\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eEnclosure: \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eImpact‑resistant polypropylene\u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eIngress protection: \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eIP44 when 13A covers closed\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e (see note above\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1932\" data-start=\"1637\"\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 402 X 200 × 125 mm (H X W X D )\u003cbr data-end=\"1916\" data-start=\"1913\"\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1932\" data-start=\"1637\"\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.5 kg\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Distro Works","offers":[{"title":"Default Title","offer_id":52103569506646,"sku":"161T\/6","price":150.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/DistroWorks161T_6-1_3.png?v=1772201875"},{"product_id":"imst-32a-single-phase-thru-to-6-x-16a-mcb","title":"PCE IMST Power Distribution Unit 32Amp Single Phase Thru to 6 x 16Amp MCB","description":"\u003cp data-start=\"0\" data-end=\"478\"\u003eThis IMST 32A single phase distribution board with loop through is a simple, professional way to create multiple circuits from a single incoming supply, while also letting you continue the supply onwards to another board or piece of equipment. It is ideal for practical setups where you have lots of smaller loads spread around, such as temporary work areas, cabins and compounds, exhibition stands, workshop bays, plant rooms, control equipment, and general site power.\u003c\/p\u003e\n\u003ch2 data-start=\"480\" data-end=\"493\"\u003eProtection\u003c\/h2\u003e\n\u003cp data-start=\"495\" data-end=\"732\"\u003eThis version uses six separate 16A outlets, each protected by its own 16A MCB (Type C). That means if one circuit is overloaded or develops a short circuit, only that one output trips, helping keep the rest of your setup running.\u003c\/p\u003e\n\u003cp data-start=\"734\" data-end=\"1067\"\u003eBecause this model is MCB only, it provides overcurrent and short circuit protection on each output, but it does not provide 30mA RCD personal protection at the outlets. It is best used where the upstream supply already provides the required RCD protection, or where RCD protection is managed elsewhere in the system.\u003c\/p\u003e\n\u003ch2 data-start=\"1069\" data-end=\"1101\"\u003eLoop through (through supply)\u003c\/h2\u003e\n\u003cp data-start=\"1103\" data-end=\"1298\"\u003eA 32A loop through is fitted so you can feed additional distribution boards or equipment from the same supply. It keeps setups tidy and reduces the need for separate splitters or extra tails.\u003c\/p\u003e\n\u003ch2 data-start=\"1300\" data-end=\"1319\"\u003eRugged enclosure\u003c\/h2\u003e\n\u003cp data-start=\"1321\" data-end=\"1681\"\u003eThe enclosure is shock resistant polyamide, designed to be tough, lightweight and genuinely portable. It has a folding steel carry handle, a stackable design, and the protective devices sit under a clear window so checks are quick and obvious. Rated \u003cstrong data-start=\"1587\" data-end=\"1595\"\u003eI\u003c\/strong\u003eP44, it is suitable for real world temporary use where conditions are not always perfect.\u003c\/p\u003e\n\u003ch2 data-start=\"1683\" data-end=\"1739\"\u003eWhy is this priced lower than similar units elsewhere\u003c\/h2\u003e\n\u003cp data-start=\"1741\" data-end=\"1962\"\u003eWe keep pricing straightforward. We buy in volume, keep overheads lean, and sell direct rather than adding multiple distributor margins. You still get the same specification and a unit that is checked before it leaves us.\u003c\/p\u003e\n\u003ch2 data-start=\"1964\" data-end=\"1976\"\u003eKey specs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"1980\" data-end=\"1990\"\u003eInput:\u003c\/strong\u003e 32A, 220 to 250V, single phase, 3 pin (P + N + E) IP44 inlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"2056\" data-end=\"2073\"\u003eLoop through:\u003c\/strong\u003e 32A, 220 to 250V, single phase, 3 pin (P + N + E) IP44 outlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"2140\" data-end=\"2152\"\u003eOutputs:\u003c\/strong\u003e 6 × 16A, 220 to 250V, IP44 sockets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"2192\" data-end=\"2207\"\u003eProtection:\u003c\/strong\u003e each output protected by a 16A single pole MCB (Type C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"2268\" data-end=\"2282\"\u003eIP rating:\u003c\/strong\u003e IP44\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"2292\" data-end=\"2301\"\u003eSize:\u003c\/strong\u003e 197 × 285 × 290 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"2325\" data-end=\"2336\"\u003eWeight:\u003c\/strong\u003e 2.8 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Distro Works","offers":[{"title":"Default Title","offer_id":52103569670486,"sku":"IMST321T\/0-6MCB","price":230.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/IMST323T06-Top.webp?v=1766011753"},{"product_id":"imst-32a-single-phase-thru-to-6-x-16a-rcbo","title":"PCE IMST Power Distribution Unit 32Amp Single Phase Thru to 6 x 16Amp RCBO","description":"\u003cp data-start=\"245\" data-end=\"622\"\u003eThis IMST 32A single phase distribution board is a simple, professional way to create multiple safe, protected circuits from a single incoming supply. It is ideal for practical setups where you have lots of smaller loads spread around, such as temporary work areas, cabins and compounds, exhibition stands, workshop bays, plant rooms, control equipment, and general site power.\u003c\/p\u003e\n\u003ch3 data-start=\"624\" data-end=\"657\"\u003eLoop through (through supply)\u003c\/h3\u003e\n\u003cp data-start=\"658\" data-end=\"821\"\u003eA 32A single phase loop through is fitted so you can continue the supply onwards to another distro, keeping your layout tidy and avoiding extra splitters or tails.\u003c\/p\u003e\n\u003ch3 data-start=\"823\" data-end=\"837\"\u003eProtection\u003c\/h3\u003e\n\u003cp data-start=\"838\" data-end=\"1124\"\u003eInstead of putting everything behind one device, this unit gives you six separate 16A outlets, each protected by its\u003cstrong\u003e \u003c\/strong\u003eown 16A 30mA two pole RCBO Type A (C curve). That means if one connected item develops a fault or nuisance trip, you only lose that one circuit, not the whole board.\u003c\/p\u003e\n\u003cp data-start=\"1126\" data-end=\"1306\"\u003eIt is also a tidy way to avoid background leakage building up across multiple devices and tripping a single shared RCD, because each outlet has its own RCD protection built in.\u003c\/p\u003e\n\u003ch3 data-start=\"1308\" data-end=\"1328\"\u003eRugged enclosure\u003c\/h3\u003e\n\u003cp data-start=\"1329\" data-end=\"1669\"\u003eThe enclosure is shock resistant polyamide, designed to be tough, lightweight and genuinely portable. It has a folding steel carry handle, a stackable design, and the protective devices sit under a clear window so checks are quick and obvious. Rated IP44, it is suitable for real world temporary use where conditions are not always perfect.\u003c\/p\u003e\n\u003ch3 data-start=\"1671\" data-end=\"1684\"\u003eKey specs\u003c\/h3\u003e\n\u003cp data-start=\"1685\" data-end=\"2099\"\u003e\u003cstrong\u003eInput\u003c\/strong\u003e: 32A, 220 to 250V, single phase, 3 pin (P + N + E) IP44 inlet\u003cbr data-start=\"1752\" data-end=\"1755\"\u003e\u003cstrong\u003eLoop through\u003c\/strong\u003e: 32A, 220 to 250V, single phase, 3 pin (P + N + E) IP44 outlet\u003cbr data-start=\"1830\" data-end=\"1833\"\u003e\u003cstrong\u003eOutputs\u003c\/strong\u003e: 6 × 16A, 220 to 250V, IP44 sockets\u003cbr data-start=\"1876\" data-end=\"1879\"\u003e\u003cstrong\u003eProtection\u003c\/strong\u003e: each output protected by a 16A 30mA 2 pole RCBO, Type A (C curve)\u003cbr data-start=\"1960\" data-end=\"1963\"\u003e\u003cstrong\u003eIP rating\u003c\/strong\u003e: IP44\u003cbr data-start=\"1978\" data-end=\"1981\"\u003e\u003cstrong\u003eSize\u003c\/strong\u003e: 197 × 285 × 290 mm\u003cbr data-start=\"2005\" data-end=\"2008\"\u003e\u003cstrong\u003eWeigh\u003c\/strong\u003et: 3.1 kg\u003c\/p\u003e","brand":"Distro Works","offers":[{"title":"Default Title","offer_id":52103569703254,"sku":"IMST321T\/0-6RCBO","price":340.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/IMST323T06-Top_23c2a0ff-67ff-40f1-9fc7-43c8ce960970.webp?v=1766011755"},{"product_id":"imst-32a-single-phase-to-4-x-16a-mcb-and-overall-rcd","title":"PCE IMST Power Distribution Unit 32Amp Single Phase to 4 x 16Amp MCB and Overall RCD","description":"\u003cp data-start=\"149\" data-end=\"512\"\u003eThis IMST 32A single phase distribution board is a simple, professional way to create multiple protected circuits from a single incoming supply. It is ideal for practical setups where you have smaller loads spread around, such as temporary work areas, cabins and compounds, exhibition stands, workshop bays, plant rooms, control equipment, and general site power.\u003c\/p\u003e\n\u003ch3 data-start=\"514\" data-end=\"528\"\u003eProtection\u003c\/h3\u003e\n\u003cp data-start=\"529\" data-end=\"668\"\u003eThis unit provides four separate 16A outlets, each protected by its own 16A MCB (Type C) for overload and short circuit protection.\u003c\/p\u003e\n\u003cp data-start=\"670\" data-end=\"1009\"\u003eIn addition, the board is protected by a single shared 30mA RCD covering all outputs. This gives you RCD protection across the whole unit, but it also means if any one outlet develops an earth leakage fault (or if leakage builds up across multiple connected items), the shared RCD can trip and switch all four outlets off together.\u003c\/p\u003e\n\u003cp data-start=\"1011\" data-end=\"1175\"\u003eThis model is a good fit when you want a straightforward, compact board with RCD protection included and you are happy with a shared trip point across all circuits.\u003c\/p\u003e\n\u003ch3 data-start=\"1177\" data-end=\"1197\"\u003eRugged enclosure\u003c\/h3\u003e\n\u003cp data-start=\"1198\" data-end=\"1538\"\u003eThe enclosure is shock resistant polyamide, designed to be tough, lightweight and genuinely portable. It has a folding steel carry handle, a stackable design, and the protective devices sit under a clear window so checks are quick and obvious. Rated IP44, it is suitable for real world temporary use where conditions are not always perfect.\u003c\/p\u003e\n\u003ch3 data-start=\"1540\" data-end=\"1597\"\u003eWhy is this priced lower than similar units elsewhere\u003c\/h3\u003e\n\u003cp data-start=\"1598\" data-end=\"1820\"\u003eWe keep pricing straight forward. We buy in volume, keep overheads lean, and sell direct rather than adding multiple distributor margins. You still get the same specification and a unit that is checked before it leaves us.\u003c\/p\u003e\n\u003ch3 data-start=\"1822\" data-end=\"1835\"\u003eKey specs\u003c\/h3\u003e\n\u003cp data-start=\"1836\" data-end=\"2187\"\u003e\u003cstrong\u003eInput\u003c\/strong\u003e: 32A, 220 to 250V, single phase, 3 pin (P + N + E) IP44 inlet\u003cbr data-start=\"1903\" data-end=\"1906\"\u003e\u003cstrong\u003eOutputs\u003c\/strong\u003e: 4 × 16A, 220 to 250V, IP44 sockets\u003cbr data-start=\"1949\" data-end=\"1952\"\u003e\u003cstrong\u003eProtection\u003c\/strong\u003e: shared 30mA RCD protecting all outputs, plus 16A MCB (Type C) on each outlet\u003cbr data-start=\"2044\" data-end=\"2047\"\u003e\u003cstrong\u003eIP rating\u003c\/strong\u003e: IP44\u003cbr data-start=\"2062\" data-end=\"2065\"\u003e\u003cstrong\u003eSize\u003c\/strong\u003e: 240 x 300 x 200 mm\u003cbr data-start=\"2146\" data-end=\"2149\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.5kg\u003c\/p\u003e","brand":"PCE","offers":[{"title":"Default Title","offer_id":52103569736022,"sku":"IMST321\/0-4RCD","price":215.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/image_d71ef2df-bd83-43fd-a8ec-c76db0f57389.jpg?v=1775853845"},{"product_id":"imst-32a-single-phase-thru-to-4-x-16a-mcb-and-overall-rcd-pce-9030656","title":"PCE IMST Power Distribution Unit 32Amp Single Phase Thru to 4 x 16Amp MCB and Overall RCD PCE 9030656","description":"\u003cp data-end=\"492\" data-start=\"129\"\u003eThis IMST 32A single phase distribution board is a simple, professional way to create multiple protected circuits from a single incoming supply. It is ideal for practical setups where you have smaller loads spread around, such as temporary work areas, cabins and compounds, exhibition stands, workshop bays, plant rooms, control equipment, and general site power.\u003c\/p\u003e\n\u003ch3 data-end=\"508\" data-start=\"494\"\u003eProtection\u003c\/h3\u003e\n\u003cp data-end=\"648\" data-start=\"509\"\u003eThis unit provides four separate 16A outlets, each protected by its own 16A MCB (Type C) for overload and short circuit protection.\u003c\/p\u003e\n\u003cp data-end=\"989\" data-start=\"650\"\u003eIn addition, the board is protected by a single shared 30mA RCD covering all outputs. This gives you RCD protection across the whole unit, but it also means if any one outlet develops an earth leakage fault (or if leakage builds up across multiple connected items), the shared RCD can trip and switch all four outlets off together.\u003c\/p\u003e\n\u003cp data-end=\"1155\" data-start=\"991\"\u003eThis model is a good fit when you want a straightforward, compact board with RCD protection included and you are happy with a shared trip point across all circuits.\u003c\/p\u003e\n\u003ch3 data-end=\"1190\" data-start=\"1157\"\u003eLoop through (through supply)\u003c\/h3\u003e\n\u003cp data-end=\"1422\" data-start=\"1191\"\u003eA\u003cstrong\u003e \u003c\/strong\u003e32A loop through outlet is fitted so you can continue the supply onwards to another distro or piece of equipment. This keeps setups tidy and makes it easy to run multiple boards from one incoming feed without extra splitters.\u003c\/p\u003e\n\u003ch3 data-end=\"1444\" data-start=\"1424\"\u003eRugged enclosure\u003c\/h3\u003e\n\u003cp data-end=\"1785\" data-start=\"1445\"\u003eThe enclosure is shock resistant polyamide, designed to be tough, lightweight and genuinely portable. It has a folding steel carry handle, a stackable design, and the protective devices sit under a clear window so checks are quick and obvious. Rated IP44, it is suitable for real world temporary use where conditions are not always perfect.\u003c\/p\u003e\n\u003ch3 data-end=\"1844\" data-start=\"1787\"\u003eWhy is this priced lower than similar units elsewhere\u003c\/h3\u003e\n\u003cp data-end=\"2067\" data-start=\"1845\"\u003eWe keep pricing straight forward. We buy in volume, keep overheads lean, and sell direct rather than adding multiple distributor margins. You still get the same specification and a unit that is checked before it leaves us.\u003c\/p\u003e\n\u003ch3 data-end=\"2082\" data-start=\"2069\"\u003eKey specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-end=\"2480\" data-start=\"2083\"\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e: 32A, 220 to 250V, single phase, 3 pin (P + N + E) IP44 inlet\u003cbr data-end=\"2153\" data-start=\"2150\"\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2480\" data-start=\"2083\"\u003e\n\u003cstrong\u003eLoop out\u003c\/strong\u003e: 32A, 220 to 250V, single phase, 3 pin (P + N + E) IP44 outlet\u003cbr data-end=\"2227\" data-start=\"2224\"\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2480\" data-start=\"2083\"\u003e\n\u003cstrong\u003eOutputs\u003c\/strong\u003e: 4 × 16A, 220 to 250V, IP44 sockets\u003cbr data-end=\"2273\" data-start=\"2270\"\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2480\" data-start=\"2083\"\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e: shared 30mA RCD protecting all outputs, plus 16A MCB (Type C) on each outlet\u003cbr data-end=\"2368\" data-start=\"2365\"\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2480\" data-start=\"2083\"\u003e\n\u003cstrong\u003eIP rating\u003c\/strong\u003e: IP44\u003cbr data-end=\"2386\" data-start=\"2383\"\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2480\" data-start=\"2083\"\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 197 X 310 x 242 mm (H X W X D)\u003cbr data-end=\"2442\" data-start=\"2439\"\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2480\" data-start=\"2083\"\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.8kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PCE","offers":[{"title":"Default Title","offer_id":52103569768790,"sku":"IMST321T\/0-4RCD","price":225.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/IMST321T0-6TOP_4983939a-c497-4ff6-ad40-7ffb04c31297.webp?v=1766011756"},{"product_id":"16amp-single-phase-6-x-13amp-distribution-board-copy","title":"Black 16Amp Single Phase 6 x 13Amp Distribution Board (Black)","description":"\u003cp class=\"p1\"\u003eOur 16A to 6 × 13A power distribution board with black connectors is built for fast, tidy power where you need multiple low power outlets from a single 16A supply, without relying on domestic multi-plugs\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt’s ideal for:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003etemporary workstations (laptops, chargers, small screens)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eexhibition stands and pop‑up retail\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eoffices, classrooms and training rooms\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eworkshops and test benches\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eevents setups where low visibility connectors are preferred\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p1\"\u003eThe black 16A input and loop through output make this unit especially suited to AV and stage environments, helping keep cabling discreet and less visually intrusive.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eWhy there’s no RCBO in this unit\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eA common question is “Why doesn’t this have an RCBO built in?”\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eUnder \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eBS 7909\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eBS 7671\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, \u003c\/span\u003e16A single‑phase supplies are typically provided with 30mA RCD protection upstream\u003cspan\u003e. Adding another 30mA RCD\/RCBO inside this distro would place \u003c\/span\u003etwo 30mA RCD devices in series\u003cspan\u003e, which is generally redundant and can increase the chance of nuisance tripping.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eDesign and build\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eImpact‑resistant polypropylene\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e housing for hardwearing use and good chemical\/corrosion resistance\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eErgonomic handle design\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e: easy to carry, and the shape allows users to carry \u003c\/span\u003eup to four units using two hands\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eLightweight\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e with a compact footprint for storage and transport\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cstrong\u003eSuitable\u003c\/strong\u003e for floor mounting or suspending (application dependent)\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eGreen LED power indicator\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e shows supply present at a glance\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eLoop through makes scaling easy\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp class=\"p3\"\u003eThe 16A loop through outlet allows you to run multiple units from a single supply when you need more outlets across a wider area. This keeps setups tidy and avoids long runs of domestic extension leads.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eIP rating note\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe 13A sockets have covers that bring the outlets to \u003c\/span\u003eIP44 when closed\u003cspan\u003e (not in use). \u003c\/span\u003eOnce plugs are inserted, the 13A outlets are no longer IP44\u003cstrong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eKey specs \u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e: 16A 230V single phase (black connector)\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong\u003eLoop through\u003c\/strong\u003e: 16A single phase (black connector)\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong\u003eOutputs\u003c\/strong\u003e: 6 × 13A UK sockets\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong\u003eIndicator\u003c\/strong\u003e: Green power LED\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e: Impact resistant polypropylene\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong\u003eIngress protection\u003c\/strong\u003e: IP44 when socket covers are closed (see note above)\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 402 × 200 × 125 mm (H × W × D)\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.3 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Distro Works","offers":[{"title":"Default Title","offer_id":52937519726934,"sku":"M161T\/6","price":160.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/IMG_4484.jpg?v=1774458870"},{"product_id":"black-16amp-single-phase-6-x-13amp-distribution-board-copy","title":"Black 32Amp Single Phase 6 x 13Amp Distribution Board (Black)","description":"\u003cp class=\"p1\"\u003eOur 32A to 6 × 13A power distribution board with black connectors is built for fast, tidy power where you need multiple low power outlets from a single 32A supply, without relying on domestic multi-plugs\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt’s ideal for:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003etemporary workstations (laptops, chargers, small screens)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eexhibition stands and pop‑up retail\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eoffices, classrooms and training rooms\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eworkshops and test benches\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eevents setups where low visibility connectors are preferred\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p1\"\u003eThe black 32A input and loop through output make this unit especially suited to AV and stage environments, helping keep cabling discreet and less visually intrusive.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eWhy there’s no RCBO in this unit\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eA common question is “Why doesn’t this have an RCBO built in?”\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eUnder \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eBS 7909\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eBS 7671\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, 32\u003c\/span\u003eA single‑phase supplies are typically provided with 30mA RCD protection upstream\u003cspan\u003e. Adding another 30mA RCD\/RCBO inside this distro would place \u003c\/span\u003etwo 30mA RCD devices in series\u003cspan\u003e, which is generally redundant and can increase the chance of nuisance tripping.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eDesign and build\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eImpact‑resistant polypropylene\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e housing for hardwearing use and good chemical\/corrosion resistance\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eErgonomic handle design\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e: easy to carry, and the shape allows users to carry \u003c\/span\u003eup to four units using two hands\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eLightweight\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e with a compact footprint for storage and transport\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cstrong\u003eSuitable\u003c\/strong\u003e for floor mounting or suspending (application dependent)\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eGreen LED power indicator\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e shows supply present at a glance\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eLoop through makes scaling easy\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp class=\"p3\"\u003eThe 32A loop through outlet allows you to run multiple units from a single supply when you need more outlets across a wider area. This keeps setups tidy and avoids long runs of domestic extension leads.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eIP rating note\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe 13A sockets have covers that bring the outlets to \u003c\/span\u003eIP44 when closed\u003cspan\u003e (not in use). \u003c\/span\u003eOnce plugs are inserted, the 13A outlets are no longer IP44\u003cstrong\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eKey specs \u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e: 32A 230V single phase (black connector)\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong\u003eLoop through\u003c\/strong\u003e: 32A single phase (black connector)\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong\u003eOutputs\u003c\/strong\u003e: 6 × 13A UK sockets\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong\u003eIndicator\u003c\/strong\u003e: Green power LED\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e: Impact resistant polypropylene\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong\u003eIngress protection\u003c\/strong\u003e: IP44 when socket covers are closed (see note above)\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 402 × 200 × 125 mm (H × W × D)\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.3 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Distro Works","offers":[{"title":"Default Title","offer_id":52942284554582,"sku":"M321T\/6","price":160.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/IMG_4484.jpg?v=1774458870"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/collections\/Distro32A-13ASideAngle2-694.webp?v=1766883924","url":"https:\/\/distroworks.co.uk\/en-eu\/collections\/single-phase-distro.oembed","provider":"Distro Works","version":"1.0","type":"link"}