{"title":"Three Phase Distro","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOur Three\u003cstrong data-start=\"29\" data-end=\"75\"\u003e \u003c\/strong\u003ephase distribution boards (distros) make it quick and tidy to split one incoming supply into multiple protected outputs, ideal for events, site work, workshops, pop-ups, and temporary installs where you need reliable power without the mess.\u003c\/p\u003e","products":[{"product_id":"imst-32a-three-phase-to-6-x-16a-mcb","title":"PCE IMST Power Distribution Unit 32Amp Three Phase to 6 x 16Amp MCB","description":"\u003cp data-end=\"360\" data-start=\"0\"\u003eThis IMST 32A three phase distribution board is a simple, professional way to create multiple circuits from a single incoming supply. It is ideal for practical setups where you have lots of smaller loads spread around, such as temporary work areas, cabins and compounds, exhibition stands, workshop bays, plant rooms, control equipment, and general site power.\u003c\/p\u003e\n\u003cp data-end=\"376\" data-start=\"362\"\u003e\u003cstrong data-end=\"376\" data-start=\"362\"\u003eProtection\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-end=\"615\" data-start=\"378\"\u003eThis version uses six separate 16A outlets, each protected by its own 16A MCB (Type C). That means if one circuit is overloaded or develops a short circuit, only that one output trips, helping keep the rest of your setup running.\u003c\/p\u003e\n\u003cp data-end=\"946\" data-start=\"617\"\u003eBecause this model is MCB only, it provides overcurrent and short circuit protection on each output, but it does not provide 30mA RCD personal protection at the outlets. It is best used where the upstream supply already provides the required RCD protection, or where RCD protection is managed elsewhere in the system.\u003c\/p\u003e\n\u003cp data-end=\"968\" data-start=\"948\"\u003e\u003cstrong data-end=\"968\" data-start=\"948\"\u003eRugged enclosure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-end=\"1314\" data-start=\"970\"\u003eThe enclosure is shock resistant polyamide, designed to be tough, lightweight and genuinely portable. It has a folding steel carry handle, a stackable design, and the protective devices sit under a clear window so checks are quick and obvious. Rated IP44, it is suitable for real world temporary use where conditions are not always perfect.\u003c\/p\u003e\n\u003cp data-end=\"1329\" data-start=\"1316\"\u003e\u003cstrong data-end=\"1329\" data-start=\"1316\"\u003eKey specs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"1637\" data-start=\"1331\"\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e: 32A,\u003cspan\u003e 240 to 415V\u003c\/span\u003e, 5 pin (3P + N + E) IP44 inlet\u003cbr data-end=\"1388\" data-start=\"1385\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1637\" data-start=\"1331\"\u003e\n\u003cstrong\u003eOutputs\u003c\/strong\u003e: 6 × 16A, 220 to 250V, IP44 sockets\u003cbr data-end=\"1434\" data-start=\"1431\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1637\" data-start=\"1331\"\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e: each output protected by a 16A single pole MCB (Type C)\u003cbr data-end=\"1504\" data-start=\"1501\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1637\" data-start=\"1331\"\u003e\n\u003cstrong\u003eIP rating\u003c\/strong\u003e: IP44\u003cbr data-end=\"1522\" data-start=\"1519\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1637\" data-start=\"1331\"\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 197 × 285 × 290 mm\u003cbr data-end=\"1549\" data-start=\"1546\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1637\" data-start=\"1331\"\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e 2.8kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PCE","offers":[{"title":"Default Title","offer_id":52103564755286,"sku":"IMST323\/0-6MCB","price":220.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/9030184Ktop.webp?v=1766011710"},{"product_id":"imst-32a-three-phase-to-6-x-16a-rcbo-9030184k","title":"PCE IMST Power Distribution Unit 32Amp Three Phase to 6 x 16Amp RCBO 9030184K","description":"\u003cp data-start=\"168\" data-end=\"546\"\u003eThis IMST 32A three phase distribution board is a simple, professional way to create multiple safe, protected circuits from a single incoming supply. It is perfect for practical setups where you have lots of smaller loads spread around, such as temporary work areas, cabins and compounds, exhibition stands, workshop bays, plant rooms, control equipment, and general site power.\u003c\/p\u003e\n\u003cp data-start=\"548\" data-end=\"562\"\u003e\u003cstrong data-start=\"548\" data-end=\"562\"\u003eProtection\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"564\" data-end=\"974\"\u003eInstead of putting everything behind one device, this unit gives you six separate 16A outlets, each protected by its own\u003cstrong\u003e \u003c\/strong\u003e16A 30mA two pole Type A RCBO (C curve). That means if one connected item develops a fault or nuisance trip, you only lose that one circuit, not the whole board. It is also a tidy way to avoid background leakage building up across multiple devices and tripping a single shared RCD.\u003c\/p\u003e\n\u003cp data-start=\"976\" data-end=\"996\"\u003e\u003cstrong data-start=\"976\" data-end=\"996\"\u003eRugged enclosure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"998\" data-end=\"1342\"\u003eThe enclosure is shock resistant polyamide, designed to be tough, lightweight and genuinely portable. It has a folding steel carry handle, a stackable design, and the protective devices sit under a clear window so checks are quick and obvious. Rated IP44, it is suitable for real world temporary use where conditions are not always perfect.\u003c\/p\u003e\n\u003cp data-start=\"1344\" data-end=\"1357\"\u003e\u003cstrong data-start=\"1344\" data-end=\"1357\"\u003eKey specs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"1344\" data-end=\"1357\"\u003eInput: 32A, 240 to 415V, 5 pin (3P + N + E) IP44 inlet\u003c\/li\u003e\n\u003cli data-start=\"1344\" data-end=\"1357\"\u003eOutputs: 6 × 16A, 220 to 250V, IP44 sockets\u003c\/li\u003e\n\u003cli\u003eProtection: each output protected by a 16A 30mA two pole Type A RCBO (C curve)\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44\u003c\/li\u003e\n\u003cli\u003eSize: 197 × 285 × 290 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 3.1 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PCE","offers":[{"title":"Default Title","offer_id":52103564788054,"sku":"IMST323\/0-6RCBO","price":330.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/9030184Ktop_b1f3f3c8-3e35-4b40-bc0a-09707f8f7273.webp?v=1766011712"},{"product_id":"imst-32a-3-phase-to-3-x-32a-rcbo-9030657","title":"PCE IMST Distribution Box 32A 415V 32Amp 3 Phase to 3 x 32Amp RCBO 9030657","description":"\u003cp data-start=\"154\" data-end=\"551\"\u003eThis IMST 32A three phase distribution board is a simple, professional way to create multiple safe, protected circuits from a single incoming supply. It is ideal when you need higher power single phase outlets for appliances, temporary work areas, cabins and compounds, exhibition stands, workshop bays, plant rooms, control equipment, and general site power. \u003cspan class=\"\" data-state=\"closed\"\u003e\u003cspan class=\"ms-1 inline-flex max-w-full items-center relative top-[-0.094rem] animate-[show_150ms_ease-in]\" data-testid=\"webpage-citation-pill\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"553\" data-end=\"567\"\u003eProtection\u003c\/h3\u003e\n\u003cp data-start=\"569\" data-end=\"1002\"\u003eInstead of putting everything behind one device, this unit gives you three separate 32A outlets, each protected by its own\u003cstrong\u003e \u003c\/strong\u003etwo pole RCBO. That means if one connected item develops a fault or nuisance trip, you only lose that one outlet, not the whole board. It is also a tidy way to avoid background leakage building up across multiple connected devices and tripping a single shared RCD. \u003cspan class=\"\" data-state=\"closed\"\u003e\u003cspan class=\"ms-1 inline-flex max-w-full items-center relative top-[-0.094rem] animate-[show_150ms_ease-in]\" data-testid=\"webpage-citation-pill\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"1004\" data-end=\"1024\"\u003eRugged enclosure\u003c\/h3\u003e\n\u003cp data-start=\"1026\" data-end=\"1313\"\u003eThe IMST enclosure is made from shock resistant thermoplastic, designed to be tough, lightweight and genuinely portable. It is stackable for easy transport and storage, has an ergonomic carry handle, and is rated IP44 for indoor and outdoor use. \u003cspan class=\"\" data-state=\"closed\"\u003e\u003cspan class=\"ms-1 inline-flex max-w-full items-center relative top-[-0.094rem] animate-[show_150ms_ease-in]\" data-testid=\"webpage-citation-pill\"\u003e\u003ca href=\"https:\/\/distroworks.co.uk\/shop\/distro\/three-phase-distro\/32a-3-phase-to-3-x-32a-rcbo\/\" rel=\"noopener\" alt=\"https:\/\/distroworks.co.uk\/shop\/distro\/three-phase-distro\/32a-3-phase-to-3-x-32a-rcbo\/\" class=\"flex h-4.5 overflow-hidden rounded-xl px-2 text-[9px] font-medium transition-colors duration-150 ease-in-out text-token-text-secondary! bg-[#F4F4F4]! dark:bg-[#303030]!\" target=\"_blank\"\u003e\u003cspan class=\"relative start-0 bottom-0 flex h-full w-full items-center\"\u003e\u003cspan class=\"flex h-4 w-full items-center justify-between overflow-hidden\"\u003e\u003cspan class=\"max-w-[15ch] grow truncate overflow-hidden text-center\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"1315\" data-end=\"1372\"\u003eWhy is this priced lower than similar units elsewhere\u003c\/h3\u003e\n\u003cp data-start=\"1374\" data-end=\"1595\"\u003eWe keep pricing straightforward. We buy in volume, keep overheads lean, and sell direct rather than adding multiple distributor margins. You still get the same specification and a unit that is checked before it leaves us.\u003c\/p\u003e\n\u003ch3 data-start=\"1597\" data-end=\"1610\"\u003eKey specs\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput: 32A, 240 to 415V, 5 pin (3P + N + E) IP44 inlet\u003c\/li\u003e\n\u003cli\u003eOutputs: 3 × 32A, 220 to 250V, IP44 sockets\u003c\/li\u003e\n\u003cli\u003eProtection: each output protected by a 32A 30mA two pole Type A RCBO (C curve)\u003c\/li\u003e\n\u003cli\u003eIP rating: IP44\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e197 X 305 X 260 mm (H X W X D)\u003c\/li\u003e\n\u003cli\u003eWeight: 3.1 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PCE","offers":[{"title":"Default Title","offer_id":52103564820822,"sku":"IMST323\/0-0-3RCBO","price":250.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/9030183Top.webp?v=1775511036"},{"product_id":"63a-3-phase-distribution-board","title":"63Amp 3 Phase Distribution Board","description":"\u003cp data-end=\"357\" data-start=\"0\"\u003eOur 63Amp three phase distribution board is built for larger power setups where you need a single incoming supply feeding multiple circuits safely and reliably. It suits site compounds, workshops, plant, industrial maintenance, exhibitions, outdoor installations and temporary power jobs where loads are higher, and the distribution needs to stay dependable.\u003c\/p\u003e\n\u003cp data-end=\"661\" data-start=\"359\"\u003eUnlike many Distribution boards that rely on lightweight moulded housings, this unit uses a hard wearing impact resistant polypropylene enclosure chosen for demanding use, with strong chemical and corrosion resistance. It is designed for real handling and transport, not just sitting in a dry cupboard.\u003c\/p\u003e\n\u003ch3 data-end=\"705\" data-start=\"663\"\u003e\u003cstrong data-end=\"705\" data-start=\"663\"\u003eClear, confidence inspiring indication\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-end=\"926\" data-start=\"707\"\u003eEvery output has a green LED power indicator so you can see at a glance which circuits are live. A phase rotation indicator is fitted so you can quickly confirm the supply is correct before energising three phase loads.\u003c\/p\u003e\n\u003ch3 data-end=\"957\" data-start=\"928\"\u003e\u003cstrong data-end=\"957\" data-start=\"928\"\u003eLoop out (through supply)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-end=\"1172\" data-start=\"959\"\u003eA\u003cstrong\u003e \u003c\/strong\u003e63A three phase loop out is fitted so you can continue the supply onwards to additional distribution boards or equipment, keeping your power layout tidy and reducing the need for splitters or separate tails.\u003c\/p\u003e\n\u003ch3 data-end=\"1200\" data-start=\"1174\"\u003e\u003cstrong data-end=\"1200\" data-start=\"1174\"\u003eTransport and handling\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-end=\"1479\" data-start=\"1202\"\u003eBecause these boards get moved a lot, it’s fitted with proper carry handles for easier handling on site. The handle design also gives you solid ratchet strap points, making it simple to secure the unit during transport without worrying about the enclosure deforming or warping.\u003c\/p\u003e\n\u003ch3 data-end=\"1518\" data-start=\"1481\"\u003e\u003cstrong data-end=\"1518\" data-start=\"1481\"\u003eIncoming protection and isolation\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-end=\"1728\" data-start=\"1520\"\u003eThe incoming supply is protected by a \u003cstrong data-end=\"1565\" data-start=\"1558\"\u003e63A\u003c\/strong\u003e four pole device providing overcurrent protection and a clear point of isolation for safe working (ideal when the unit is being moved, serviced, or reconfigured).\u003c\/p\u003e\n\u003ch3 data-end=\"1774\" data-start=\"1730\"\u003e\u003cstrong data-end=\"1774\" data-start=\"1730\"\u003eSingle phase outputs, protected properly\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-end=\"2030\" data-start=\"1776\"\u003eAll single phase outputs are protected by two pole Type A RCBO protection, giving RCD protection and overcurrent protection in one device. This is the cleanest way to protect individual circuits and helps reduce nuisance tripping on real equipment loads.\u003c\/p\u003e\n\u003ch3 data-end=\"2101\" data-start=\"2032\"\u003e\u003cstrong data-end=\"2101\" data-start=\"2032\"\u003eThree phase output protection options (depending what you select)\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-end=\"2286\" data-start=\"2103\"\u003eThe three phase output can be supplied with different protection options so you can match it to what you are feeding downstream, whether that is a sub board or three phase appliances.\u003c\/p\u003e\n\u003cp data-end=\"2426\" data-start=\"2288\"\u003e\u003cstrong data-end=\"2313\" data-start=\"2288\"\u003eFixed 30mA RCD option\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-end=\"2426\" data-start=\"2288\"\u003eA good choice where you want straightforward additional protection at the output with a fixed 30mA trip level.\u003c\/p\u003e\n\u003cp data-end=\"2702\" data-start=\"2428\"\u003e\u003cstrong data-end=\"2469\" data-start=\"2428\"\u003eVariable RCD option (with key bypass)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-end=\"2702\" data-start=\"2428\"\u003eIf you select the Variable RCD option, it uses an earth leakage relay with adjustable trip level and time delay, giving you a practical way to suit different loads and site conditions instead of being locked into a single setting.\u003c\/p\u003e\n\u003cp data-end=\"3023\" data-start=\"2704\"\u003eAdjustable trip sensitivity from 30mA up to 10A\u003cbr data-end=\"2754\" data-start=\"2751\"\u003eSelectable time delay from instantaneous up to 10 seconds (in steps)\u003cbr data-end=\"2825\" data-start=\"2822\"\u003eKey controlled bypass so only the keyholder can bypass RCD protection when required by a competent person\u003cbr data-end=\"2933\" data-start=\"2930\"\u003eClear indication when bypass is active, so it is obvious what state the protection is in\u003c\/p\u003e\n\u003ch3 data-end=\"3392\" data-start=\"3025\"\u003e\u003cstrong data-end=\"3049\" data-start=\"3025\"\u003eOutput configuration\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-end=\"3392\" data-start=\"3025\"\u003e12 × 16A single phase outputs, protected by two pole Type A RCBO \u003cbr data-end=\"3136\" data-start=\"3133\"\u003e6 × 32A single phase outputs, protected by two pole Type A RCBO \u003cbr data-end=\"3213\" data-start=\"3210\"\u003e2 × 32A three phase output, protection selectable (including Variable RCD option) \u003cbr data-end=\"3303\" data-start=\"3300\"\u003e1 × 63A \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThree Phase loop Through Unprotected\u003c\/span\u003e \u003c\/p\u003e\n\u003ch3 data-end=\"3645\" data-start=\"3394\"\u003e\u003cstrong data-end=\"3407\" data-start=\"3394\"\u003eKey specs\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-end=\"3645\" data-start=\"3394\"\u003e\u003cstrong\u003eIncoming\u003c\/strong\u003e: 63A three phase, with four pole protection + isolation\u003cbr data-end=\"3481\" data-start=\"3478\"\u003e\u003cstrong\u003eIndicators\u003c\/strong\u003e: green LED on each output, plus phase rotation indication\u003cbr data-end=\"3552\" data-start=\"3549\"\u003e\u003cstrong\u003eEnclosure\u003c\/strong\u003e: impact resistant polypropylene\u003cbr data-end=\"3596\" data-start=\"3593\"\u003e\u003cstrong\u003eIP rating\u003c\/strong\u003e: IP44\u003cbr data-end=\"3614\" data-start=\"3611\"\u003e\u003cstrong\u003eEarth lug\u003c\/strong\u003e for secondary bonding\u003c\/p\u003e\n\u003cp data-end=\"3645\" data-start=\"3394\"\u003e\u003cstrong\u003eSize\u003c\/strong\u003e: 640 x 570 x 450 mm (H X W X D)\u003c\/p\u003e\n\u003cp data-end=\"3645\" data-start=\"3394\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e: 31.2 kg\u003c\/p\u003e\n\u003cp data-end=\"3645\" data-start=\"3394\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Distro Works","offers":[{"title":"MCB and RCD","offer_id":52103564919126,"sku":"633T\/0-12-6\/0-2R","price":1788.0,"currency_code":"GBP","in_stock":true},{"title":"MCB \u0026 Variable RCD","offer_id":52103564951894,"sku":"633T\/0-12-6\/0-2V","price":2137.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/63A3TRearLeftSqaure.webp?v=1772668221"},{"product_id":"125a-3-phase-distribution-board","title":"125Amp 3 Phase Distribution Board","description":"\u003cp data-end=\"1047\" data-start=\"668\"\u003eOur 125A three phase distribution board is built for larger power setups where you need a single incoming supply feeding multiple circuits safely and reliably. It suits site compounds, workshops, plant, industrial maintenance, exhibitions, outdoor installations and temporary power jobs where loads are higher, and the distribution needs to stay dependable.\u003c\/p\u003e\n\u003cp data-end=\"1346\" data-start=\"1049\"\u003eUnlike many Distribution boards that rely on lightweight moulded housings, this unit uses a hard wearing impact resistant polypropylene enclosure chosen for demanding use, with strong chemical and corrosion resistance. It is designed for real handling and transport, not just sitting in a dry cupboard.\u003c\/p\u003e\n\u003ch3 data-end=\"1393\" data-start=\"1348\"\u003eClear, confidence inspiring indication\u003c\/h3\u003e\n\u003cp data-end=\"1613\" data-start=\"1394\"\u003eEvery output has a green LED power indicator so you can see at a glance which circuits are live. A phase rotation indicator is fitted so you can quickly confirm the supply is correct before energising three phase loads.\u003c\/p\u003e\n\u003ch3 data-start=\"1361\" data-end=\"1391\"\u003eLoop out (through supply)\u003c\/h3\u003e\n\u003cp data-start=\"1392\" data-end=\"1606\"\u003eA 125A three phase loop out is fitted so you can continue the supply onwards to additional distribution boards or equipment, keeping your power layout tidy and reducing the need for splitters or separate tails.\u003c\/p\u003e\n\u003ch3 data-end=\"1221\" data-start=\"1194\"\u003eTransport and handling\u003c\/h3\u003e\n\u003cp data-end=\"1499\" data-start=\"1222\"\u003eBecause these boards get moved a lot, it’s fitted with proper carry handles for easier handling on site. The handle design also gives you solid ratchet strap points, making it simple to secure the unit during transport without worrying about the enclosure deforming or warping.\u003c\/p\u003e\n\u003ch3 data-end=\"1655\" data-start=\"1615\"\u003eIncoming protection and isolation\u003c\/h3\u003e\n\u003cp data-end=\"1861\" data-start=\"1656\"\u003eThe incoming supply is protected by a 125A four pole device providing overcurrent protection and a clear point of isolation for safe working (ideal when the unit is being moved, serviced, or reconfigured).\u003c\/p\u003e\n\u003ch3 data-end=\"1910\" data-start=\"1863\"\u003eSingle phase outputs, protected properly\u003c\/h3\u003e\n\u003cp data-end=\"2165\" data-start=\"1911\"\u003eAll single phase outputs are protected by two pole Type A RCBO protection, giving RCD protection and overcurrent protection in one device. This is the cleanest way to protect individual circuits and helps reduce nuisance tripping on real equipment loads.\u003c\/p\u003e\n\u003ch3 data-end=\"2239\" data-start=\"2167\"\u003eThree phase output protection options (depending what you select)\u003c\/h3\u003e\n\u003cp data-end=\"2423\" data-start=\"2240\"\u003eThe three phase output can be supplied with different protection options so you can match it to what you are feeding downstream, whether that is a sub board or three phase appliances.\u003c\/p\u003e\n\u003cp data-end=\"2563\" data-start=\"2425\"\u003e\u003cstrong data-end=\"2450\" data-start=\"2425\"\u003eFixed 30mA RCD option\u003c\/strong\u003e\u003cbr data-end=\"2453\" data-start=\"2450\"\u003eA good choice where you want straightforward additional protection at the output with a fixed 30mA trip level.\u003c\/p\u003e\n\u003cp data-end=\"2839\" data-start=\"2565\"\u003e\u003cstrong data-end=\"2606\" data-start=\"2565\"\u003eVariable RCD option (with key bypass)\u003c\/strong\u003e\u003cbr data-end=\"2609\" data-start=\"2606\"\u003eIf you select the Variable RCD option, it uses an earth leakage relay with adjustable trip level and time delay, giving you a practical way to suit different loads and site conditions instead of being locked into a single setting.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable trip sensitivity from 30mA up to 10A\u003c\/li\u003e\n\u003cli\u003eSelectable time delay from instantaneous up to 10 seconds (in steps)\u003c\/li\u003e\n\u003cli\u003eKey controlled bypass so only the keyholder can bypass RCD protection when required by a competent person\u003c\/li\u003e\n\u003cli\u003eClear indication when bypass is active, so it is obvious what state the protection is in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"2947\" data-end=\"2992\"\u003eOutput configuration \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"2995\" data-end=\"3027\"\u003e12 × 16A single phase outputs\u003c\/strong\u003e, protected by\u003cspan\u003e \u003c\/span\u003etwo pole Type A RCBO \u003cspan class=\"\" data-state=\"closed\"\u003e\u003cspan class=\"ms-1 inline-flex max-w-full items-center relative top-[-0.094rem] animate-[show_150ms_ease-in]\" data-testid=\"webpage-citation-pill\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"3109\" data-end=\"3141\"\u003e6 × 32A single phase outputs\u003c\/strong\u003e, protected by\u003cspan\u003e \u003c\/span\u003etwo pole Type A RCBO \u003cspan class=\"\" data-state=\"closed\"\u003e\u003cspan class=\"ms-1 inline-flex max-w-full items-center relative top-[-0.094rem] animate-[show_150ms_ease-in]\" data-testid=\"webpage-citation-pill\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"3223\" data-end=\"3253\"\u003e2 × 32A three phase output\u003c\/strong\u003e, protection selectable (including Variable RCD option) \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"3223\" data-end=\"3253\"\u003e1 × 63A three phase output\u003c\/strong\u003e, protection selectable (including Variable RCD option) \u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"3485\" data-start=\"3469\"\u003eKey specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncoming\u003c\/strong\u003e:\u003cstrong\u003e \u003c\/strong\u003e125A three phase, with four pole protection + isolation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndicators\u003c\/strong\u003e: green LED on each output, plus phase rotation indication\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e: impact resistant polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP rating\u003c\/strong\u003e: IP44\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEarth lug\u003c\/strong\u003e for secondary bonding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003esize\u003c\/strong\u003e: 640 x 570 x 450 mm (H X W X D)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eweight\u003c\/strong\u003e: 35kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Distro Works","offers":[{"title":"MCB and 30ma RCD","offer_id":52103564984662,"sku":"1253T\/0-12-6\/0-2R-1R","price":2366.0,"currency_code":"GBP","in_stock":true},{"title":"MCB \u0026 Variable RCD","offer_id":52103565017430,"sku":"1253T\/0-12-6\/0-2V-1V","price":2757.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/IMG_4332_3.jpg?v=1772667746"},{"product_id":"32a-3-phase-distribution-board","title":"32Amp 3 Phase Distribution Board","description":"\u003cp data-start=\"243\" data-end=\"638\"\u003eOur 32A three phase distribution board is built for practical power setups where you want a solid, easy to move unit that still gives you proper protection and control. It is ideal for workshops, site cabins, compounds, exhibitions, pop up installations, outdoor installations, industrial maintenance, and temporary power jobs where you need one incoming supply feeding multiple circuits safely.\u003c\/p\u003e\n\u003ch3 data-start=\"640\" data-end=\"685\"\u003eRugged, transport friendly construction\u003c\/h3\u003e\n\u003cp data-start=\"686\" data-end=\"1062\"\u003eUnlike many compact units that rely on lightweight moulded housings, this board uses a hard wearing impact resistant polypropylene enclosure chosen for demanding use, with strong chemical and corrosion resistance. Connections and windows are recessed within the frame to help protect sockets in transit, and the enclosure is designed to stack neatly for storage and transport.\u003c\/p\u003e\n\u003ch3 data-start=\"1064\" data-end=\"1108\"\u003eClear, confidence inspiring indication\u003c\/h3\u003e\n\u003cp data-start=\"1109\" data-end=\"1336\"\u003eEvery output has a green LED power indicator so you can see at a glance which circuits are live. A phase rotation indicator is fitted so you can quickly confirm the supply is correct before energising three phase loads.\u003c\/p\u003e\n\u003ch3 data-start=\"1338\" data-end=\"1367\"\u003ePractical output layout\u003c\/h3\u003e\n\u003cp data-start=\"1368\" data-end=\"1558\"\u003eThis unit gives you a genuinely useful mix of single phase outlets for everyday loads, plus a three phase through connection so you can loop onwards to additional distribution when required.\u003c\/p\u003e\n\u003ch3 data-start=\"1560\" data-end=\"1606\"\u003eSingle phase outputs, protected properly\u003c\/h3\u003e\n\u003cp data-start=\"1607\" data-end=\"1901\"\u003eAll single phase outputs are protected by two pole Type A RCBOs, providing RCD protection and overcurrent protection in one device. This also helps prevent nuisance tripping from neutral faults, which makes a real difference on real sites when lots of equipment is being plugged in and out.\u003c\/p\u003e\n\u003ch3 data-start=\"1903\" data-end=\"1939\"\u003eThree phase through connection\u003c\/h3\u003e\n\u003cp data-start=\"1940\" data-end=\"2099\"\u003eA 32A three phase through (unprotected) output is included so you can feed additional boards cleanly without having to split the incoming supply elsewhere.\u003c\/p\u003e\n\u003ch3 data-start=\"2101\" data-end=\"2138\"\u003eBuilt for real world conditions\u003c\/h3\u003e\n\u003cp data-start=\"2139\" data-end=\"2286\"\u003eThis distro is IP44, making it suitable for indoor and outdoor use where equipment still needs to keep working when conditions are not perfect.\u003c\/p\u003e\n\u003ch3 data-start=\"2288\" data-end=\"2314\"\u003eOutput configuration\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"2317\" data-end=\"2349\"\u003e6 × 16A single phase outputs\u003c\/strong\u003e, protected by two pole Type A RCBO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"2389\" data-end=\"2421\"\u003e3 × 32A single phase outputs\u003c\/strong\u003e, protected by two pole Type A RCBO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"2461\" data-end=\"2488\"\u003e32A three phase through\u003c\/strong\u003e, unprotected\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"2505\" data-end=\"2520\"\u003eKey specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"2523\" data-end=\"2533\"\u003eInput:\u003c\/strong\u003e 32A three phase 415V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"2559\" data-end=\"2574\"\u003eIndicators:\u003c\/strong\u003e green LED on each output, plus phase rotation indication\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"2636\" data-end=\"2650\"\u003eEnclosure:\u003c\/strong\u003e impact resistant polypropylene, recessed connections and windows\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"2720\" data-end=\"2742\"\u003eSecondary bonding:\u003c\/strong\u003e green earth lug point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"2769\" data-end=\"2783\"\u003eIP rating:\u003c\/strong\u003e IP44\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"2793\" data-end=\"2808\"\u003eDimensions:\u003c\/strong\u003e 265 × 570 × 450 mm (height × width × depth)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"2857\" data-end=\"2868\"\u003eWeight:\u003c\/strong\u003e 13.5 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Distro Works","offers":[{"title":"Default Title","offer_id":52103565050198,"sku":"323T\/0-6-3","price":772.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/PNG-image-50A4CE7DD4C9-1-e1674664918947.png?v=1766011717"},{"product_id":"63a-socapex-distro","title":"63Amp Socapex Distro","description":"\u003cp data-start=\"550\" data-end=\"825\"\u003eBuilt for real world touring and production use, this 63A three phase Socapex distro is designed for reliable power distribution to lighting and stage loads, including rigs that end up behind LED screens, on platforms, or outdoors where equipment still needs to keep working.\u003c\/p\u003e\n\u003ch3 data-start=\"827\" data-end=\"863\"\u003e24 channels, protected properly\u003c\/h3\u003e\n\u003cp data-start=\"864\" data-end=\"1222\"\u003eThis unit provides 24 Socapex channels in tota\u003cstrong data-start=\"883\" data-end=\"915\"\u003el\u003c\/strong\u003e, delivered via 4 ShowSafe 19 pin Socapex outputs. You also get 6 × 16A outlets for local kit such as control gear, networking, work lights, or small practical loads. It’s a genuinely useful setup because you can run the rig and still have convenient power nearby without dragging out another board.\u003c\/p\u003e\n\u003ch3 data-start=\"1224\" data-end=\"1276\"\u003eWhy this is different to one RCD for everything\u003c\/h3\u003e\n\u003cp data-start=\"1277\" data-end=\"1477\"\u003eMany Socapex distros put all channels behind a single RCD. That can be a problem because one earth fault, or enough normal background leakage across multiple connected devices, can trip the whole lot.\u003c\/p\u003e\n\u003cp data-start=\"1479\" data-end=\"1766\"\u003eOn this unit, each Socapex channel has its own two pole Type A, C curve RCBO. If one channel develops a fault, only that channel trips, so the rest of the rig stays live. It also helps avoid nuisance tripping caused by leakage adding up across lots of connected fixtures and drivers.\u003c\/p\u003e\n\u003ch3 data-end=\"2024\" data-start=\"1970\"\u003eIP rated distro, because your fixtures already are\u003c\/h3\u003e\n\u003cp data-end=\"2216\" data-start=\"2025\"\u003eIn the last couple of years we’ve seen a huge increase in IP rated fixtures (IP44, IP65, IP67 and beyond)… but plenty of power distribution on stages is still effectively “best kept dry”.\u003c\/p\u003e\n\u003cp data-end=\"2482\" data-start=\"2218\"\u003eThis is exactly why this unit exists. When the weather turns, or when that\u003cspan\u003e \u003c\/span\u003e\u003cem data-end=\"2298\" data-start=\"2293\"\u003eone\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eleak appears in the exact wrong place (it always seems to), you shouldn’t need someone sprinting around with tarpaulin, plastic bags, and a roll of gaffer trying to protect the power.\u003c\/p\u003e\n\u003cp data-end=\"2675\" data-start=\"2484\"\u003eThis distro is built to handle real conditions and provides IP44 protection when both Socapex outputs are connected, so you can get on with the show rather than babysitting the electrics.\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"2423\" data-end=\"2494\"\u003eVariable RCD option on the 32A three phase output, with key bypass\u003c\/h3\u003e\n\u003cp data-start=\"2495\" data-end=\"2691\"\u003eThe 32A three phase output can be supplied with a variable RCD system, giving you a practical way to suit different loads and site conditions instead of being locked into a single setting.\u003c\/p\u003e\n\u003cp data-start=\"2693\" data-end=\"3028\"\u003e• Adjustable trip sensitivity from 30 mA up to 10 A\u003cbr data-start=\"2748\" data-end=\"2751\"\u003e• Selectable time delay from instantaneous up to 10 seconds\u003cbr data-start=\"2814\" data-end=\"2817\"\u003e• Key controlled bypass, so only the keyholder can bypass RCD protection when required by a competent person\u003cbr data-start=\"2929\" data-end=\"2932\"\u003e• Clear indication when bypass is active, so it is obvious what state the protection is in\u003c\/p\u003e\n\u003cp data-start=\"3030\" data-end=\"3165\"\u003eThis makes the 32A three phase output ideal for feeding sub distribution or motor power where the connected load can change job to job.\u003c\/p\u003e\n\u003ch3 data-start=\"3167\" data-end=\"3201\"\u003eTouring friendly construction\u003c\/h3\u003e\n\u003cp data-start=\"3202\" data-end=\"3438\"\u003eThe enclosure is made from impact resistant polypropylene, chosen for hard wearing use with strong chemical and corrosion resistance. It is designed to handle life on the road, whether it is used bare or installed into a flightcase.\u003c\/p\u003e\n\u003cp data-start=\"3440\" data-end=\"3509\"\u003e\u003cstrong data-start=\"3440\" data-end=\"3465\"\u003eEnclosure dimensions:\u003c\/strong\u003e 542 x 490 x 450 mm (height x width x depth)\u003c\/p\u003e\n\u003cp data-start=\"3440\" data-end=\"3509\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e: 29kg\u003c\/p\u003e\n\u003ch3 data-start=\"3812\" data-end=\"3838\"\u003eKey specs \u003c\/h3\u003e\n\u003cp data-start=\"3839\" data-end=\"4393\"\u003e•\u003cstrong\u003e Supply\u003c\/strong\u003e: 63A three phase input with 63A loop through\u003cbr data-start=\"3892\" data-end=\"3895\"\u003e• \u003cstrong\u003eSocapex\u003c\/strong\u003e: 4 ShowSafe 19 pin outlets providing 24 channels total\u003cbr data-start=\"3959\" data-end=\"3962\"\u003e• \u003cstrong\u003eLocal outlets\u003c\/strong\u003e: 6 × 16A for control gear and essentials\u003cbr data-start=\"4018\" data-end=\"4021\"\u003e• \u003cstrong\u003eProtection\u003c\/strong\u003e: 24 individual two pole Type A, C curve RCBO protected Socapex channels\u003cbr data-start=\"4105\" data-end=\"4108\"\u003e•\u003cstrong\u003e Bypass\u003c\/strong\u003e: 32A three phase output: optional variable RCD system with key bypass\u003cbr data-start=\"4178\" data-end=\"4181\"\u003e\u003cmeta charset=\"utf-8\"\u003e• \u003cstrong\u003eIndication\u003c\/strong\u003e Green LED indication on outputs and channels so it is obvious what is live at a glance\u003cbr data-start=\"3630\" data-end=\"3633\"\u003e• \u003cstrong\u003ePhase rotation\u003c\/strong\u003e indication to catch supply issues before they become a problem\u003cbr data-start=\"4238\" data-end=\"4241\"\u003e• \u003cstrong\u003eIP rating\u003c\/strong\u003e: IP44 when Socapex outputs are connected\u003cbr data-start=\"4293\" data-end=\"4296\"\u003e• \u003cstrong\u003eEnclosure\u003c\/strong\u003e: impact resistant polypropylene 542 x 490 x 450 mm (height x width x depth)\u003c\/p\u003e\n\u003cp data-start=\"3839\" data-end=\"4393\"\u003e \u003c\/p\u003e","brand":"Distro Works","offers":[{"title":"Default Title","offer_id":52103565148502,"sku":"633T\/0-6\/0-1\/4","price":2879.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/IMG_8659.webp?v=1766011718"},{"product_id":"32a-socapex-distro","title":"32Amp Socapex Distro","description":"\u003cp data-end=\"1029\" data-start=\"754\"\u003eBuilt for real world touring and production use, this 32A three phase Socapex distro is designed for reliable power distribution to lighting and stage loads, including rigs that end up behind LED screens, on platforms, or outdoors where equipment still needs to keep working.\u003c\/p\u003e\n\u003ch3 data-end=\"1066\" data-start=\"1031\"\u003e12 channels, protected properly\u003c\/h3\u003e\n\u003cp data-end=\"1419\" data-start=\"1067\"\u003eThis unit provides 12 Socapex channels in total, delivered via two ShowSafe 19 pin\u003cstrong data-end=\"1173\" data-start=\"1134\"\u003e \u003c\/strong\u003eSocapex outputs, plus two 16A outlets for local kit such as control gear, networking, work lights, or small practical loads. It’s a genuinely useful setup because you can run the rig and still have convenient power nearby without dragging out another board.\u003c\/p\u003e\n\u003ch3 data-end=\"1474\" data-start=\"1421\"\u003eWhy this is different to “one RCD for everything”\u003c\/h3\u003e\n\u003cp data-end=\"1675\" data-start=\"1475\"\u003eMany Socapex distros put all channels behind a single RCD. That can be a problem because one earth fault, or enough normal background leakage across multiple connected devices, can trip the whole lot.\u003c\/p\u003e\n\u003cp data-end=\"1968\" data-start=\"1677\"\u003eOn this unit, each Socapex channel has its own two pole Type A, C curve RCBO. If one channel develops a fault, only that channel trips, so the rest of the rig stays live. It also helps avoid nuisance tripping caused by leakage adding up across lots of connected fixtures and drivers.\u003c\/p\u003e\n\u003ch3 data-end=\"2024\" data-start=\"1970\"\u003eIP rated distro, because your fixtures already are\u003c\/h3\u003e\n\u003cp data-end=\"2216\" data-start=\"2025\"\u003eIn the last couple of years we’ve seen a huge increase in IP rated fixtures (IP44, IP65, IP67 and beyond)… but plenty of power distribution on stages is still effectively “best kept dry”.\u003c\/p\u003e\n\u003cp data-end=\"2482\" data-start=\"2218\"\u003eThis is exactly why this unit exists. When the weather turns, or when that \u003cem data-end=\"2298\" data-start=\"2293\"\u003eone\u003c\/em\u003e leak appears in the exact wrong place (it always seems to), you shouldn’t need someone sprinting around with tarpaulin, plastic bags, and a roll of gaffer trying to protect the power.\u003c\/p\u003e\n\u003cp data-end=\"2675\" data-start=\"2484\"\u003eThis distro is built to handle real conditions and provides IP44 protection when both Socapex outputs are connected, so you can get on with the show rather than babysitting the electrics.\u003c\/p\u003e\n\u003ch3 data-end=\"2710\" data-start=\"2677\"\u003eTouring friendly construction\u003c\/h3\u003e\n\u003cp data-end=\"2946\" data-start=\"2711\"\u003eThe enclosure is made from\u003cstrong\u003e \u003c\/strong\u003eimpact resistant polypropylene, chosen for hard wearing use with strong chemical and corrosion resistance. It’s designed to handle life on the road, whether it is used bare or installed into a flightcase.\u003c\/p\u003e\n\u003cp data-end=\"3106\" data-start=\"2948\"\u003eIt’s also flightcase friendly and suits standard rack style builds, with enclosure dimensions: 265 mm (6U) x 490 mm x 450 mm (height x width x depth).\u003c\/p\u003e\n\u003ch3 data-end=\"3137\" data-start=\"3108\"\u003eIndication and protection\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong data-end=\"3164\" data-start=\"3140\"\u003eGreen LED indication\u003c\/strong\u003e on outputs\/channels so it is obvious what is live at a glance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-end=\"3260\" data-start=\"3231\"\u003ePhase rotation indication\u003c\/strong\u003e to catch supply issues before they become a problem\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-end=\"3335\" data-start=\"3317\"\u003e3 pole 32A MCB\u003c\/strong\u003e for overcurrent protection and isolation on the incoming supply\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-end=\"3424\" data-start=\"3404\"\u003e32A loop through\u003c\/strong\u003e to feed additional distribution cleanly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-end=\"3469\" data-start=\"3466\"\u003e\n\u003ch2 data-end=\"3496\" data-start=\"3471\"\u003eKey specs \u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-end=\"3542\" data-start=\"3499\"\u003e\n\u003cstrong\u003eSupply\u003c\/strong\u003e: 32A three phase with loop through\u003c\/li\u003e\n\u003cli data-end=\"3614\" data-start=\"3545\"\u003e\n\u003cstrong\u003eSocapex\u003c\/strong\u003e: two ShowSafe 19 pin outlets carrying 12 channels total\u003c\/li\u003e\n\u003cli data-end=\"3675\" data-start=\"3617\"\u003e\n\u003cstrong\u003eLocal outlets\u003c\/strong\u003e: 2 × 16A for control gear \/ essentials\u003c\/li\u003e\n\u003cli data-end=\"3760\" data-start=\"3678\"\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e: 12 × individual two pole Type A, C curve RCBO protected channels\u003c\/li\u003e\n\u003cli data-end=\"3820\" data-start=\"3763\"\u003e\n\u003cstrong\u003eIndication\u003c\/strong\u003e: green power LEDs, phase rotation indication\u003c\/li\u003e\n\u003cli data-end=\"3884\" data-start=\"3823\"\u003e\n\u003cstrong\u003eIP rating\u003c\/strong\u003e: IP44 when both Socapex outputs are connected\u003c\/li\u003e\n\u003cli data-end=\"3930\" data-start=\"3887\"\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e: impact resistant polypropylene\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"3658\" data-start=\"3640\"\u003e\n\u003cstrong data-end=\"3651\" data-start=\"3640\"\u003eWeight:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e13.5kg\u003c\/li\u003e\n\u003cli data-end=\"3974\" data-start=\"3933\"\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: 265 mm (6U) x 490 mm x 450 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Distro Works","offers":[{"title":"Default Title","offer_id":52103565181270,"sku":"323T\/0-2\/0-0\/2","price":1550.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/DistroWorksSocaType2.png?v=1766011720"},{"product_id":"63a-3-phase-compact-distribution-board","title":"63Amp 3 Phase Compact Distribution Board","description":"\u003cp data-end=\"920\" data-start=\"553\"\u003eOur 63A Compact is built for practical power setups where you want a solid, easy to move distribution board that still gives you proper protection and control. It’s ideal for workshops, site cabins, compounds, exhibitions, pop up installations, industrial maintenance, and temporary power jobs where you need a single incoming supply feeding multiple circuits safely.\u003c\/p\u003e\n\u003cp data-end=\"1287\" data-start=\"922\"\u003eUnlike many compact units that rely on lightweight moulded housings, this board uses a hard wearing impact resistant polypropylene enclosure chosen for demanding use, with strong chemical and corrosion resistance. It is genuinely easy to handle at only 19kg, with proper carry handles, making it a great choice when you need something rugged but still portable.\u003c\/p\u003e\n\u003cp data-end=\"1597\" data-start=\"1289\"\u003e\u003cstrong data-end=\"1331\" data-start=\"1289\"\u003eClear, confidence inspiring indication\u003c\/strong\u003e\u003cbr\u003eEvery output has a green LED power indicator so you can see at a glance which circuits are live. A phase rotation indicato\u003cstrong data-end=\"1463\" data-start=\"1435\"\u003er\u003c\/strong\u003e is fitted so you can quickly confirm the supply is correct before energising three phase loads. \u003cspan data-state=\"closed\" class=\"\"\u003e\u003cspan data-testid=\"webpage-citation-pill\" class=\"ms-1 inline-flex max-w-full items-center relative top-[-0.094rem] animate-[show_150ms_ease-in]\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-end=\"1776\" data-start=\"1599\"\u003e\u003cstrong data-end=\"1636\" data-start=\"1599\"\u003eIncoming protection and isolation\u003c\/strong\u003e\u003cbr\u003eThe incoming supply is protected by a 63A four pole MCB, giving overcurrent protection and a clear point of isolation for safe working.\u003c\/p\u003e\n\u003cp data-end=\"2048\" data-start=\"1778\"\u003e\u003cstrong data-end=\"1822\" data-start=\"1778\"\u003eSingle phase outputs, protected properly\u003c\/strong\u003e\u003cbr\u003eAll 16A and 32A single phase outputs are protected by two pole Type A RCBOs with a C curve, providing RCD protection and overcurrent protection in one device, and helping reduce nuisance trips on real equipment loads.\u003c\/p\u003e\n\u003cp data-end=\"2755\" data-start=\"2050\"\u003e\u003cstrong data-end=\"2119\" data-start=\"2050\"\u003eThree phase output protection options (depending what you select)\u003c\/strong\u003e\u003cbr\u003eThe 32A three phase output is available with different protection options so you can match it to what you are feeding downstream, whether that is a sub board or three phase appliances.\u003cbr data-end=\"2349\" data-start=\"2346\"\u003eIf you choose the Variable RCD option, it uses an earth leakage relay with adjustable trip level and time delay, plus a key controlled bypass with a clear illuminated indication when bypassed. Trip sensitivity can be set from 30mA up to 10A, and the time delay can be set from instantaneous up to 10 seconds in selectable steps, which is ideal when your downstream setup changes job to job.\u003c\/p\u003e\n\u003ch3 data-end=\"2992\" data-start=\"2947\"\u003eOutput configuration \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong data-end=\"3027\" data-start=\"2995\"\u003e6 × 16A single phase outputs\u003c\/strong\u003e, protected by \u003cstrong data-end=\"3066\" data-start=\"3042\"\u003etwo pole Type A RCBO\u003c\/strong\u003e \u003cspan data-state=\"closed\" class=\"\"\u003e\u003cspan data-testid=\"webpage-citation-pill\" class=\"ms-1 inline-flex max-w-full items-center relative top-[-0.094rem] animate-[show_150ms_ease-in]\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-end=\"3141\" data-start=\"3109\"\u003e6 × 32A single phase outputs\u003c\/strong\u003e, protected by \u003cstrong data-end=\"3180\" data-start=\"3156\"\u003etwo pole Type A RCBO\u003c\/strong\u003e \u003cspan data-state=\"closed\" class=\"\"\u003e\u003cspan data-testid=\"webpage-citation-pill\" class=\"ms-1 inline-flex max-w-full items-center relative top-[-0.094rem] animate-[show_150ms_ease-in]\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-end=\"3253\" data-start=\"3223\"\u003e1 × 32A three phase output\u003c\/strong\u003e, protection selectable (including Variable RCD option) \u003cspan data-state=\"closed\" class=\"\"\u003e\u003cspan data-testid=\"webpage-citation-pill\" class=\"ms-1 inline-flex max-w-full items-center relative top-[-0.094rem] animate-[show_150ms_ease-in]\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"3376\" data-start=\"3350\"\u003eKey specs \u003cstrong data-end=\"3027\" data-start=\"2995\"\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-end=\"3472\" data-start=\"3379\"\u003e\n\u003cstrong data-end=\"3392\" data-start=\"3379\"\u003eIncoming:\u003c\/strong\u003e 63A three phase, protected by 63A four pole MCB (overcurrent + isolation)\u003c\/li\u003e\n\u003cli data-end=\"3587\" data-start=\"3475\"\u003e\n\u003cstrong data-end=\"3490\" data-start=\"3475\"\u003eIndicators:\u003c\/strong\u003e green LED on each output, plus phase rotation indication \u003cspan data-state=\"closed\" class=\"\"\u003e\u003cspan data-testid=\"webpage-citation-pill\" class=\"ms-1 inline-flex max-w-full items-center relative top-[-0.094rem] animate-[show_150ms_ease-in]\"\u003e\u003ca class=\"flex h-4.5 overflow-hidden rounded-xl px-2 text-[9px] font-medium transition-colors duration-150 ease-in-out text-token-text-secondary! bg-[#F4F4F4]! dark:bg-[#303030]!\" alt=\"https:\/\/distroworks.co.uk\/shop\/distro\/three-phase-distro\/63a-3-phase-compact-distribution-board\/\" rel=\"noopener\" href=\"https:\/\/distroworks.co.uk\/shop\/distro\/three-phase-distro\/63a-3-phase-compact-distribution-board\/\" target=\"_blank\"\u003e\u003cspan class=\"relative start-0 bottom-0 flex h-full w-full items-center\"\u003e\u003cspan class=\"flex h-4 w-full items-center justify-between\"\u003e\u003cspan class=\"max-w-[15ch] grow truncate overflow-hidden text-center\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"3587\" data-start=\"3475\"\u003e\n\u003cspan data-state=\"closed\" class=\"\"\u003e\u003cspan data-testid=\"webpage-citation-pill\" class=\"ms-1 inline-flex max-w-full items-center relative top-[-0.094rem] animate-[show_150ms_ease-in]\"\u003e\u003ca class=\"flex h-4.5 overflow-hidden rounded-xl px-2 text-[9px] font-medium transition-colors duration-150 ease-in-out text-token-text-secondary! bg-[#F4F4F4]! dark:bg-[#303030]!\" alt=\"https:\/\/distroworks.co.uk\/shop\/distro\/three-phase-distro\/63a-3-phase-compact-distribution-board\/\" rel=\"noopener\" href=\"https:\/\/distroworks.co.uk\/shop\/distro\/three-phase-distro\/63a-3-phase-compact-distribution-board\/\" target=\"_blank\"\u003e\u003cspan class=\"relative start-0 bottom-0 flex h-full w-full items-center\"\u003e\u003cspan class=\"flex h-4 w-full items-center justify-between\"\u003e\u003cspan class=\"max-w-[15ch] grow truncate overflow-hidden text-center\"\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cstrong data-end=\"3604\" data-start=\"3590\"\u003eEnclosure:\u003c\/strong\u003e impact resistant polypropylene\u003c\/li\u003e\n\u003cli data-end=\"3658\" data-start=\"3640\"\u003e\n\u003cstrong data-end=\"3651\" data-start=\"3640\"\u003eWeight:\u003c\/strong\u003e 19kg\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: 366 x 572 x 450 mm (H x W x D)\u003c\/li\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003eEarth lug for secondary bonding\u003c\/li\u003e\n\u003cli data-end=\"3720\" data-start=\"3661\"\u003e\n\u003cstrong data-end=\"3675\" data-start=\"3661\"\u003eIP rating:\u003c\/strong\u003e IP44\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Distro Works","offers":[{"title":"30mA RCBO","offer_id":52103565312342,"sku":"633\/0-6-6\/0-1R30","price":1215.0,"currency_code":"GBP","in_stock":true},{"title":"100mA RCBO","offer_id":52103565279574,"sku":"633\/0-6-6\/0-1R100","price":1215.0,"currency_code":"GBP","in_stock":true},{"title":"MCB \u0026 Variable RCD","offer_id":52103565246806,"sku":"633\/0-6-6\/0-1V","price":1350.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/DistroWorks36063-3.webp?v=1766011721"},{"product_id":"500a-powerlock-distribution-board-3x-125amp-3x-63amp-3x-32amp-three-phase","title":"500Amp Powerlock Distribution Board 3x 125amp 3x 63amp 3x 32amp Three Phase","description":"\u003cp\u003e\u003cstrong\u003eThis is our flagship main distribution unit, built for demanding temporary and semi permanent power setups where reliability matters.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is ideal anywhere you need a single incoming supply to feed multiple downstream boards, plant, cabins, compounds, workshops, exhibitions, outdoor installations, or large scale event and film power.\u003c\/p\u003e\n\u003cp\u003eUnlike many large distribution boards that are designed around peak ratings, this unit is built with high continuous loads in mind. The internal layout supports airflow through the enclosure, and we do not cut corners on internal cable sizing, helping reduce hot spots when the unit is working hard for long periods.\u003c\/p\u003e\n\u003ch3\u003eIncoming supply, isolation and looping onwards\u003c\/h3\u003e\n\u003cp\u003eYou get a 500A Powerlock three phase input and a 500A Powerlock three phase through output (unprotected) so you can loop onwards to additional distribution where required. The incoming supply is protected by a four pole 400A MCCB with an external lockable handle for safe isolation, lockout and tagout.\u003c\/p\u003e\n\u003ch3\u003eLocal single phase power where you need it\u003c\/h3\u003e\n\u003cp\u003eFor day to day practicality, we include local single phase outlets so crews can power small essentials without dragging out a separate board. These are perfect for work lights, chargers, small tools, control gear, or block heaters on standby generators. The single phase outputs are protected by two pole Type A RCBO protection, which combines RCD protection and overcurrent protection in one device.\u003c\/p\u003e\n\u003ch3\u003eThree phase output protection, variable RCD on this model\u003c\/h3\u003e\n\u003cp\u003eAll three phase outputs have four pole isolation and use a variable RCD system, giving you flexibility when the downstream setup changes job to job. A variable RCD system uses an earth leakage relay with adjustable sensitivity and time delay.\u003c\/p\u003e\n\u003cp\u003eOn this unit, the trip sensitivity can be adjusted from 30 mA up to 10 A, and the time delay can be set from instantaneous up to 10 seconds using selectable delay steps. This gives you a practical way to suit different loads and site conditions instead of being locked into a single setting.\u003c\/p\u003e\n\u003cp\u003eEach three phase output also includes a key controlled bypass so RCD protection can be switched off when required by a competent person. The bypass indication is clear, with blue illumination so it is obvious when protection has been bypassed.\u003c\/p\u003e\n\u003ch3\u003eMetering and monitoring\u003c\/h3\u003e\n\u003cp\u003eA programmable digital panel meter is fitted so you can actually see what is happening on the supply. The ND20LITE supports a wide range of measurements, includes RS485 Modbus for monitoring and integration, and is IP65 from the front.\u003c\/p\u003e\n\u003ch3\u003eRugged enclosure and transport friendly design\u003c\/h3\u003e\n\u003cp\u003eThe enclosure is made from impact resistant polypropylene chosen for hard wearing use, with strong chemical and corrosion resistance. Connections and windows are recessed within the frame to help protect sockets in transit. Because this is a heavy item, it is fitted with dedicated lifting handles designed for safe handling, and they also double as solid ratchet strap points so you can strap the unit down during transport without worrying about handles deforming or warping.\u003c\/p\u003e\n\u003cp\u003eOptional extras are available at additional cost, including a metal crash frame around the unit and bolt on fork pockets for easier yard and truck handling.\u003c\/p\u003e\n\u003ch3\u003eOutputs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 x 16A single phase, protected by two pole Type A RCBO\u003c\/li\u003e\n\u003cli\u003e3 x 32A single phase, protected by two pole Type A RCBO\u003c\/li\u003e\n\u003cli\u003e3 x 32A three phase, protected by four pole MCB with variable RCD system\u003c\/li\u003e\n\u003cli\u003e3 x 63A three phase, protected by four pole MCB with variable RCD system\u003c\/li\u003e\n\u003cli\u003e3 x 125A three phase, protected by four pole MCB with variable RCD system\u003c\/li\u003e\n\u003cli\u003e500A Powerlock three phase through, unprotected\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdditional features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePhase rotation indicator\u003c\/li\u003e\n\u003cli\u003eEarth lug for secondary bonding\u003c\/li\u003e\n\u003cli\u003eIP44 for indoor and outdoor use\u003c\/li\u003e\n\u003cli\u003eEnclosure dimensions: 1010 x 572 x 460 mm (H x W x D)\u003c\/li\u003e\n\u003cli\u003eWeight 57.8kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Distro Works","offers":[{"title":"Default Title","offer_id":52103565443414,"sku":"4003T\/0-3-3\/0-3V-3V-3V","price":7700.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/DistroWorks500APowerlocktypeA.webp?v=1766011724"},{"product_id":"500a-powerlock-distribution-board-6x-63amp-3x-32amp-three-phase","title":"400 Amp Powerlock Distribution Board 6x 63amp 3x 32amp Three Phase","description":"\u003cp\u003e\u003cstrong\u003eThis is our flagship main distribution unit, built for demanding temporary and semi permanent power setups where reliability matters.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is ideal anywhere you need a single incoming supply to feed multiple downstream boards, plant, cabins, compounds, workshops, exhibitions, outdoor installations, or large scale event and film power.\u003c\/p\u003e\n\u003cp\u003eUnlike many large distribution boards that are designed around peak ratings, this unit is built with high continuous loads in mind. The internal layout supports airflow through the enclosure, and we do not cut corners on internal cable sizing, helping reduce hot spots when the unit is working hard for long periods.\u003c\/p\u003e\n\u003ch3\u003eIncoming supply, isolation and looping onwards\u003c\/h3\u003e\n\u003cp\u003eYou get a 500A Powerlock three phase input and a 500A Powerlock three phase through output (unprotected) so you can loop onwards to additional distribution where required. The incoming supply is protected by a four pole 400A MCCB with an external lockable handle for safe isolation, lockout and tagout.\u003c\/p\u003e\n\u003ch3\u003eLocal single phase power where you need it\u003c\/h3\u003e\n\u003cp\u003eFor day to day practicality, we include local single phase outlets so crews can power small essentials without dragging out a separate board. These are perfect for work lights, chargers, small tools, control gear, or block heaters on standby generators. The single phase outputs are protected by two pole Type A RCBO protection, which combines RCD protection and overcurrent protection in one device.\u003c\/p\u003e\n\u003ch3\u003eThree phase output protection, variable RCD on this model\u003c\/h3\u003e\n\u003cp\u003eAll three phase outputs have four pole isolation and use a variable RCD system, giving you flexibility when the downstream setup changes job to job. A variable RCD system uses an earth leakage relay with adjustable sensitivity and time delay.\u003c\/p\u003e\n\u003cp\u003eOn this unit, the trip sensitivity can be adjusted from 30 mA up to 10 A, and the time delay can be set from instantaneous up to 10 seconds using selectable delay steps. This gives you a practical way to suit different loads and site conditions instead of being locked into a single setting.\u003c\/p\u003e\n\u003cp\u003eEach three phase output also includes a key controlled bypass so RCD protection can be switched off when required by a competent person. The bypass indication is clear, with blue illumination so it is obvious when protection has been bypassed.\u003c\/p\u003e\n\u003ch3\u003eMetering and monitoring\u003c\/h3\u003e\n\u003cp\u003eA programmable digital panel meter is fitted so you can actually see what is happening on the supply. The ND20LITE supports a wide range of measurements, includes RS485 Modbus for monitoring and integration, and is IP65 from the front.\u003c\/p\u003e\n\u003ch3\u003eRugged enclosure and transport friendly design\u003c\/h3\u003e\n\u003cp\u003eThe enclosure is made from impact resistant polypropylene chosen for hard wearing use, with strong chemical and corrosion resistance. Connections and windows are recessed within the frame to help protect sockets in transit. Because this is a heavy item, it is fitted with dedicated lifting handles designed for safe handling, and they also double as solid ratchet strap points so you can strap the unit down during transport without worrying about handles deforming or warping.\u003c\/p\u003e\n\u003cp\u003eOptional extras are available at additional cost, including a metal crash frame around the unit and bolt on fork pockets for easier yard and truck handling.\u003c\/p\u003e\n\u003ch3\u003eOutputs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 x 16A single phase, protected by two pole Type A RCBO\u003c\/li\u003e\n\u003cli\u003e3 x 32A single phase, protected by two pole Type A RCBO\u003c\/li\u003e\n\u003cli\u003e3 x 32A three phase, protected by four pole MCB with variable RCD system\u003c\/li\u003e\n\u003cli\u003e6 x 63A three phase, protected by four pole MCB with variable RCD system\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e500A Powerlock three phase through, unprotected\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdditional features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePhase rotation indicator\u003c\/li\u003e\n\u003cli\u003eEarth lug for secondary bonding\u003c\/li\u003e\n\u003cli\u003eIP44 for indoor and outdoor use\u003c\/li\u003e\n\u003cli\u003eEnclosure dimensions: 1010 x 572 x 460 mm (H x W x D)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Distro Works","offers":[{"title":"Default Title","offer_id":52103565476182,"sku":"4003T\/0-3-3\/0-0-6V","price":6500.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/DistroWorks500APowerlocktypeB.webp?v=1766011725"},{"product_id":"imst-32a-three-phase-to-2-x-32a-4-x-16a-mcb","title":"PCE IMST Power Distribution Unit 32Amp Three Phase to 2 x 32Amp, 4 x 16Amp MCB","description":"\u003cp data-start=\"81\" data-end=\"440\"\u003eThis IMST 32A three phase distribution board is a simple, professional way to create multiple circuits from a single incoming supply. It is ideal for practical setups where you have a mix of small and mid sized loads, such as temporary work areas, cabins and compounds, exhibition stands, workshop bays, plant rooms, control equipment, and general site power.\u003c\/p\u003e\n\u003ch2 data-start=\"442\" data-end=\"455\"\u003eProtection\u003c\/h2\u003e\n\u003cp data-start=\"457\" data-end=\"610\"\u003eInstead of putting everything behind one device, this unit gives you six separate outlets with individual overcurrent protection on each circuit:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"614\" data-end=\"633\"\u003e4 × 16A outlets\u003c\/strong\u003e, each protected by its own 16A MCB (Type C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"684\" data-end=\"703\"\u003e2 × 32A outlets\u003c\/strong\u003e, each protected by its own 32A MCB (Type C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"753\" data-end=\"793\"\u003ePhase split (how the load is spread)\u003c\/h3\u003e\n\u003cp data-start=\"794\" data-end=\"890\"\u003eTo help keep loading balanced across the supply, the outputs are split across phases as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"894\" data-end=\"901\"\u003eL1:\u003c\/strong\u003e 1 × 32A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"914\" data-end=\"921\"\u003eL2:\u003c\/strong\u003e 1 × 32A + 2 × 16A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"944\" data-end=\"951\"\u003eL3:\u003c\/strong\u003e 2 × 16A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"963\" data-end=\"1100\"\u003eThat means if one circuit is overloaded or develops a short circuit, only that output trips, helping keep the rest of your setup running.\u003c\/p\u003e\n\u003cp data-start=\"1102\" data-end=\"1424\"\u003eBecause this model is MCB only, it provides overload and short circuit protection on each output, but it does not provide 30mA RCD personal protection at the outlets. It is best used where the upstream supply already provides the required RCD protection, or where RCD protection is managed elsewhere in the system.\u003c\/p\u003e\n\u003ch2 data-start=\"1426\" data-end=\"1445\"\u003eRugged enclosure\u003c\/h2\u003e\n\u003cp data-start=\"1447\" data-end=\"1791\"\u003eThe enclosure is shock resistant polyamide, designed to be tough, lightweight and genuinely portable. It has a folding steel carry handle, a stackable design, and the protective devices sit under a clear window so checks are quick and obvious. Rated \u003cstrong data-start=\"1697\" data-end=\"1705\"\u003eIP44\u003c\/strong\u003e, it is suitable for real world temporary use where conditions are not always perfect.\u003c\/p\u003e\n\u003ch2 data-start=\"1793\" data-end=\"1805\"\u003eKey specs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"1809\" data-end=\"1819\"\u003eInput:\u003c\/strong\u003e 32A, 240 to 415V, 5 pin (3P + N + E) IP44 inlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"1872\" data-end=\"1884\"\u003eOutputs:\u003c\/strong\u003e 4 × 16A, 220 to 250V, IP44 sockets; 2 × 32A, 220 to 250V, IP44 sockets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"1960\" data-end=\"1975\"\u003eProtection:\u003c\/strong\u003e each output protected by an MCB (Type C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"2021\" data-end=\"2037\"\u003ePhase split:\u003c\/strong\u003e L1: 1 × 32A; L2: 1 × 32A + 2 × 16A; L3: 2 × 16A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"2090\" data-end=\"2104\"\u003eIP rating:\u003c\/strong\u003e IP44\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"2114\" data-end=\"2123\"\u003eSize:\u003c\/strong\u003e 197 × 285 × 290 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"2147\" data-end=\"2158\"\u003eWeight:\u003c\/strong\u003e 3.2kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Distro Works","offers":[{"title":"Default Title","offer_id":52103569473878,"sku":"IMST323\/0-4-2MCB","price":225.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/IMST323_0-4-2MCB.jpg?v=1775853465"},{"product_id":"imst-32a-three-phase-to-2-x-32a-4-x-16a-rcbo","title":"PCE IMST Power Distribution Unit 32Amp Three Phase to 2 x 32Amp, 4 x 16Amp RCBO","description":"\u003cp data-end=\"375\" data-start=\"0\"\u003eThis IMST 32A three phase distribution board is a simple, professional way to create multiple safe, protected circuits from a single incoming supply. It is ideal for practical setups where you have a mix of small and mid sized loads, such as temporary work areas, cabins and compounds, exhibition stands, workshop bays, plant rooms, control equipment, and general site power.\u003c\/p\u003e\n\u003ch2 data-end=\"390\" data-start=\"377\"\u003eProtection\u003c\/h2\u003e\n\u003cp data-end=\"755\" data-start=\"392\"\u003eInstead of putting everything behind one device, this unit gives you six separate outlets, each with its own RCBO. That means if one connected item develops a fault or nuisance trip, you only lose that one circuit, not the whole board. It is also a tidy way to avoid background leakage building up across multiple devices and tripping a single shared RCD.\u003c\/p\u003e\n\u003cp data-end=\"849\" data-start=\"759\"\u003e\u003cstrong data-end=\"778\" data-start=\"759\"\u003e4 × 16A outlets\u003c\/strong\u003e, each protected by its own 16A 30mA two pole Type A RCBO (C curve)\u003c\/p\u003e\n\u003cp data-end=\"942\" data-start=\"852\"\u003e\u003cstrong data-end=\"871\" data-start=\"852\"\u003e2 × 32A outlets\u003c\/strong\u003e, each protected by its own 32A 30mA two pole Type A RCBO (C curve)\u003c\/p\u003e\n\u003ch3 data-end=\"984\" data-start=\"944\"\u003ePhase split (how the load is spread)\u003c\/h3\u003e\n\u003cp data-end=\"1082\" data-start=\"986\"\u003eTo help keep loading balanced across the supply, the outputs are split across phases as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong data-end=\"1093\" data-start=\"1086\"\u003eL1:\u003c\/strong\u003e 1 × 32A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-end=\"1113\" data-start=\"1106\"\u003eL2:\u003c\/strong\u003e 1 × 32A + 2 × 16A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-end=\"1143\" data-start=\"1136\"\u003eL3:\u003c\/strong\u003e 2 × 16A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-end=\"1174\" data-start=\"1155\"\u003eRugged enclosure\u003c\/h2\u003e\n\u003cp data-end=\"1520\" data-start=\"1176\"\u003eThe enclosure is shock resistant polyamide, designed to be tough, lightweight and genuinely portable. It has a folding steel carry handle, a stackable design, and the protective devices sit under a clear window so checks are quick and obvious. Rated \u003cstrong data-end=\"1434\" data-start=\"1426\"\u003eIP44\u003c\/strong\u003e, it is suitable for real world temporary use where conditions are not always perfect.\u003c\/p\u003e\n\u003ch2 data-end=\"1534\" data-start=\"1522\"\u003eKey specs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong data-end=\"1548\" data-start=\"1538\"\u003eInput:\u003c\/strong\u003e 32A, 240 to 415V, 5 pin (3P + N + E) IP44 inlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-end=\"1613\" data-start=\"1601\"\u003eOutputs:\u003c\/strong\u003e 4 × 16A, 220 to 250V, IP44 sockets; 2 × 32A, 220 to 250V, IP44 sockets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-end=\"1704\" data-start=\"1689\"\u003eProtection:\u003c\/strong\u003e each output protected by an RCBO (Type A, C curve, 30mA)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-end=\"1786\" data-start=\"1770\"\u003ePhase split:\u003c\/strong\u003e L1: 1 × 32A; L2: 1 × 32A + 2 × 16A; L3: 2 × 16A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-end=\"1853\" data-start=\"1839\"\u003eIP rating:\u003c\/strong\u003e IP44\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-end=\"1872\" data-start=\"1863\"\u003eSize:\u003c\/strong\u003e 197 × 300 × 306 mm (H X W X D)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-end=\"1907\" data-start=\"1896\"\u003eWeight:\u003c\/strong\u003e 3.1 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PCE","offers":[{"title":"Default Title","offer_id":52103569572182,"sku":"IMST323\/0-4-2RCBO","price":345.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/9030184Ktop_a455fd56-11ff-4483-b186-444fe99cc3d9.webp?v=1766011752"},{"product_id":"imst-32a-three-phase-thru-to-6-x-16a-mcb","title":"PCE IMST Power Distribution Unit 32Amp Three Phase Thru to 6 x 16Amp MCB","description":"\u003cp data-end=\"400\" data-start=\"40\"\u003eThis IMST 32A three phase distribution board with loop through \u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eis a simple, professional way to create multiple circuits from a single incoming supply. It is ideal for practical setups where you have lots of smaller loads spread around, such as temporary work areas, cabins and compounds, exhibition stands, workshop bays, plant rooms, control equipment, and general site power.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-end=\"416\" data-start=\"402\"\u003eProtection\u003c\/h3\u003e\n\u003cp data-end=\"647\" data-start=\"418\"\u003eThis version uses six separate 16A outlets, each protected by its own 16A MCB (Type C). That means if one circuit is overloaded or develops a short circuit, only that one output trips, helping keep the rest of your setup running.\u003c\/p\u003e\n\u003cp data-end=\"966\" data-start=\"649\"\u003eBecause this model is MCB only, it provides overcurrent and short circuit protection on each output, but it does not provide 30mA RCD personal protection at the outlets. It is best used where the upstream supply already provides the required RCD protection, or where RCD protection is managed elsewhere in the system.\u003c\/p\u003e\n\u003ch3 data-end=\"1001\" data-start=\"968\"\u003eLoop through (through supply)\u003c\/h3\u003e\n\u003cp data-end=\"1256\" data-start=\"1003\"\u003eA 32A three phase loop through outlet is fitted so you can continue the supply onwards to additional distribution boards or equipment. This keeps power layouts tidy and makes it easy to run multiple boards from one incoming feed without extra splitters.\u003c\/p\u003e\n\u003ch3 data-end=\"1278\" data-start=\"1258\"\u003eRugged enclosure\u003c\/h3\u003e\n\u003cp data-end=\"1620\" data-start=\"1280\"\u003eThe enclosure is shock resistant polyamide, designed to be tough, lightweight and genuinely portable. It has a folding steel carry handle, a stackable design, and the protective devices sit under a clear window so checks are quick and obvious. Rated IP44, it is suitable for real world temporary use where conditions are not always perfect.\u003c\/p\u003e\n\u003ch3 data-end=\"1635\" data-start=\"1622\"\u003eKey specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-end=\"1932\" data-start=\"1637\"\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e: 32A, 240 to 415V, 5 pin (3P + N + E) IP44 inlet\u003cbr data-end=\"1694\" data-start=\"1691\"\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1932\" data-start=\"1637\"\u003e\n\u003cstrong\u003eLoop out\u003c\/strong\u003e: 32A, 240 to 415V, 5 pin (3P + N + E) IP44 outlet\u003cbr data-end=\"1755\" data-start=\"1752\"\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1932\" data-start=\"1637\"\u003e\n\u003cstrong\u003eOutputs\u003c\/strong\u003e: 6 × 16A, 220 to 250V, IP44 sockets\u003cbr data-end=\"1801\" data-start=\"1798\"\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1932\" data-start=\"1637\"\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e: each output protected by a 16A single pole MCB (Type C)\u003cbr data-end=\"1871\" data-start=\"1868\"\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1932\" data-start=\"1637\"\u003e\n\u003cstrong\u003eIP rating\u003c\/strong\u003e: IP44\u003cbr data-end=\"1889\" data-start=\"1886\"\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1932\" data-start=\"1637\"\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 197 × 285 × 290 mm\u003cbr data-end=\"1916\" data-start=\"1913\"\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1932\" data-start=\"1637\"\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.8 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PCE","offers":[{"title":"Default Title","offer_id":52103569801558,"sku":"IMST323T\/0-6MCB","price":235.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/IMST323T0-6Top.webp?v=1766011756"},{"product_id":"imst-32a-three-phase-thru-to-6-x-16a-rcbo","title":"PCE IMST Power Distribution Unit 32Amp Three Phase Thru to 6 x 16Amp RCBO","description":"\u003cp data-start=\"95\" data-end=\"473\"\u003eThis IMST 32A three phase distribution board is a simple, professional way to create multiple safe, protected circuits from a single incoming supply. It is perfect for practical setups where you have lots of smaller loads spread around, such as temporary work areas, cabins and compounds, exhibition stands, workshop bays, plant rooms, control equipment, and general site power.\u003c\/p\u003e\n\u003ch2 data-start=\"475\" data-end=\"488\"\u003eProtection\u003c\/h2\u003e\n\u003cp data-start=\"490\" data-end=\"892\"\u003eInstead of putting everything behind one device, this unit gives you six separate 16A outlets, each protected by its own 16A 30mA two pole Type A RCBO (C curve). That means if one connected item develops a fault or nuisance trip, you only lose that one circuit, not the whole board. It is also a tidy way to avoid background leakage building up across multiple devices and tripping a single shared RCD.\u003c\/p\u003e\n\u003ch2 data-start=\"894\" data-end=\"926\"\u003eLoop through (through supply)\u003c\/h2\u003e\n\u003cp data-start=\"928\" data-end=\"1181\"\u003eA 32A three phase loop through outlet is fitted so you can continue the supply onwards to additional distribution boards or equipment. This keeps power layouts tidy and makes it easy to run multiple boards from one incoming feed without extra splitters.\u003c\/p\u003e\n\u003ch2 data-start=\"1183\" data-end=\"1202\"\u003eRugged enclosure\u003c\/h2\u003e\n\u003cp data-start=\"1204\" data-end=\"1544\"\u003eThe enclosure is shock resistant polyamide, designed to be tough, lightweight and genuinely portable. It has a folding steel carry handle, a stackable design, and the protective devices sit under a clear window so checks are quick and obvious. Rated IP44, it is suitable for real world temporary use where conditions are not always perfect.\u003c\/p\u003e\n\u003ch2 data-start=\"1546\" data-end=\"1602\"\u003eWhy is this priced lower than similar units elsewhere\u003c\/h2\u003e\n\u003cp data-start=\"1604\" data-end=\"1826\"\u003eWe keep pricing straight forward. We buy in volume, keep overheads lean, and sell direct rather than adding multiple distributor margins. You still get the same specification and a unit that is checked before it leaves us.\u003c\/p\u003e\n\u003ch2 data-start=\"1828\" data-end=\"1840\"\u003eKey specs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-start=\"1842\" data-end=\"2148\"\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e: 32A, 240 to 415V, 5 pin (3P + N + E) IP44 inlet\u003cbr data-start=\"1896\" data-end=\"1899\"\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1842\" data-end=\"2148\"\u003e\n\u003cstrong\u003eLoop out\u003c\/strong\u003e: 32A, 240 to 415V, 5 pin (3P + N + E) IP44 outlet\u003cbr data-start=\"1957\" data-end=\"1960\"\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1842\" data-end=\"2148\"\u003e\n\u003cstrong\u003eOutputs\u003c\/strong\u003e: 6 × 16A, 220 to 250V, IP44 sockets\u003cbr data-start=\"2003\" data-end=\"2006\"\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1842\" data-end=\"2148\"\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e: each output protected by a 16A 30mA two pole Type A RCBO (C curve)\u003cbr data-start=\"2084\" data-end=\"2087\"\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1842\" data-end=\"2148\"\u003e\n\u003cstrong\u003eIP rating\u003c\/strong\u003e: IP44\u003cbr data-start=\"2102\" data-end=\"2105\"\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1842\" data-end=\"2148\"\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 197 × 285 × 290 mm\u003cbr data-start=\"2129\" data-end=\"2132\"\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1842\" data-end=\"2148\"\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 3.1 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-start=\"2150\" data-end=\"2170\"\u003e\u003cbr\u003e\u003c\/h2\u003e","brand":"PCE","offers":[{"title":"Default Title","offer_id":52103569834326,"sku":"IMST323T\/0-6RCBO","price":340.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/IMST323T0-6Top_46f88093-ab06-4c01-b5a5-504de32b0510.webp?v=1766011758"},{"product_id":"imst-32a-three-phase-thru-to-3-x-32a-rcbo","title":"PCE IMST Power Distribution Unit 32Amp Three Phase Thru to 3 x 32Amp RCBO","description":"\u003cp data-start=\"0\" data-end=\"359\"\u003eThis IMST 32A three phase distribution board is a simple, professional way to create multiple safe, protected circuits from a single incoming supply. It is ideal when you need higher power single phase outlets for appliances, temporary work areas, cabins and compounds, exhibition stands, workshop bays, plant rooms, control equipment, and general site power.\u003c\/p\u003e\n\u003ch2 data-start=\"361\" data-end=\"374\"\u003eProtection\u003c\/h2\u003e\n\u003cp data-start=\"376\" data-end=\"785\"\u003eInstead of putting everything behind one device, this unit gives you three separate 32A outlets, each protected by its own 30mA two pole Type A RCBO (C curve). That means if one connected item develops a fault or nuisance trip, you only lose that one outlet, not the whole board. It is also a tidy way to avoid background leakage building up across multiple connected devices and tripping a single shared RCD.\u003c\/p\u003e\n\u003ch2 data-start=\"787\" data-end=\"819\"\u003eLoop through (through supply)\u003c\/h2\u003e\n\u003cp data-start=\"821\" data-end=\"1074\"\u003eA 32A three phase loop through outlet is fitted so you can continue the supply onwards to additional distribution boards or equipment. This keeps power layouts tidy and makes it easy to run multiple boards from one incoming feed without extra splitters.\u003c\/p\u003e\n\u003ch2 data-start=\"1076\" data-end=\"1095\"\u003eRugged enclosure\u003c\/h2\u003e\n\u003cp data-start=\"1097\" data-end=\"1342\"\u003eThe IMST enclosure is made from shock resistant thermoplastic, designed to be tough, lightweight and genuinely portable. It is stackable for easy transport and storage, has an ergonomic carry handle, and is rated IP44 for indoor and outdoor use.\u003c\/p\u003e\n\u003ch2 data-start=\"1344\" data-end=\"1400\"\u003eWhy is this priced lower than similar units elsewhere\u003c\/h2\u003e\n\u003cp data-start=\"1402\" data-end=\"1623\"\u003eWe keep pricing straightforward. We buy in volume, keep overheads lean, and sell direct rather than adding multiple distributor margins. You still get the same specification and a unit that is checked before it leaves us.\u003c\/p\u003e\n\u003ch2 data-start=\"1625\" data-end=\"1637\"\u003eKey specs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-start=\"1639\" data-end=\"1918\"\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e: 32A, 240 to 415V, 5 pin (3P + N + E) IP44 inlet\u003cbr data-start=\"1693\" data-end=\"1696\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1639\" data-end=\"1918\"\u003e\n\u003cstrong\u003eLoop out\u003c\/strong\u003e: 32A, 240 to 415V, 5 pin (3P + N + E) IP44 outlet\u003cbr data-start=\"1754\" data-end=\"1757\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1639\" data-end=\"1918\"\u003e\n\u003cstrong\u003eOutputs\u003c\/strong\u003e: 3 × 32A, 220 to 250V, IP44 sockets\u003cbr data-start=\"1800\" data-end=\"1803\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1639\" data-end=\"1918\"\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e: each output protected by a 32A 30mA two pole Type A RCBO (C curve)\u003cbr data-start=\"1881\" data-end=\"1884\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1639\" data-end=\"1918\"\u003e\n\u003cstrong\u003eIP rating\u003c\/strong\u003e: IP44\u003c\/li\u003e\n\u003cli data-start=\"1639\" data-end=\"1918\"\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 197 X 255 x 310 mm (H X W X D)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1639\" data-end=\"1918\"\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 3.1 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PCE","offers":[{"title":"Default Title","offer_id":52103569867094,"sku":"IMST323T\/0-0-3RCBO","price":250.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/IMST323T0-0-3Top.webp?v=1766011759"},{"product_id":"imst-32a-three-phase-thru-to-2-x-32a-4-x-16a-mcb","title":"PCE IMST Power Distribution Unit 32Amp Three Phase Thru to 2 x 32Amp, 4 x 16Amp MCB","description":"\u003cp data-end=\"359\" data-start=\"0\"\u003eThis IMST 32A three phase distribution board is a simple, professional way to create multiple circuits from a single incoming supply. It is ideal for practical setups where you have a mix of small and mid sized loads, such as temporary work areas, cabins and compounds, exhibition stands, workshop bays, plant rooms, control equipment, and general site power.\u003c\/p\u003e\n\u003ch2 data-end=\"374\" data-start=\"361\"\u003eProtection\u003c\/h2\u003e\n\u003cp data-end=\"521\" data-start=\"376\"\u003eInstead of putting everything behind one device, this unit gives you six separate outlets with individual overcurrent protection on each circuit:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 × 16A outlets, each protected by its own 16A MCB (Type C)\u003c\/li\u003e\n\u003cli\u003e2 × 32A outlets, each protected by its own 32A MCB (Type C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-end=\"689\" data-start=\"650\"\u003ePhase split (how the load is spread)\u003c\/h2\u003e\n\u003cp data-end=\"787\" data-start=\"691\"\u003eTo help keep loading balanced across the supply, the outputs are split across phases as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL1: 1 × 32A\u003c\/li\u003e\n\u003cli\u003eL2: 1 × 32A + 2 × 16A\u003c\/li\u003e\n\u003cli\u003eL3: 2 × 16A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"985\" data-start=\"848\"\u003eThat means if one circuit is overloaded or develops a short circuit, only that output trips, helping keep the rest of your setup running.\u003c\/p\u003e\n\u003cp data-end=\"1301\" data-start=\"987\"\u003eBecause this model is MCB only, it provides overload and short circuit protection on each output, but it does not provide 30mA RCD personal protection at the outlets. It is best used where the upstream supply already provides the required RCD protection, or where RCD protection is managed elsewhere in the system.\u003c\/p\u003e\n\u003ch2 data-end=\"1335\" data-start=\"1303\"\u003eLoop through (through supply)\u003c\/h2\u003e\n\u003cp data-end=\"1569\" data-start=\"1337\"\u003eA 32A three phase loop through outlet is fitted so you can continue the supply onwards to additional distribution boards or equipment. This keeps power layouts tidy and makes it easy to add more distribution without extra splitters.\u003c\/p\u003e\n\u003ch2 data-end=\"1590\" data-start=\"1571\"\u003eRugged enclosure\u003c\/h2\u003e\n\u003cp data-end=\"1932\" data-start=\"1592\"\u003eThe enclosure is shock resistant polyamide, designed to be tough, lightweight and genuinely portable. It has a folding steel carry handle, a stackable design, and the protective devices sit under a clear window so checks are quick and obvious. Rated IP44, it is suitable for real world temporary use where conditions are not always perfect.\u003c\/p\u003e\n\u003ch2 data-end=\"1946\" data-start=\"1934\"\u003eKey specs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-end=\"2326\" data-start=\"1948\"\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e: 32A, 240 to 415V, 5 pin (3P + N + E) IP44 inlet\u003cbr data-end=\"2005\" data-start=\"2002\"\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2326\" data-start=\"1948\"\u003e\n\u003cstrong\u003eLoop out\u003c\/strong\u003e: 32A, 240 to 415V, 5 pin (3P + N + E) IP44 outlet\u003cbr data-end=\"2066\" data-start=\"2063\"\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2326\" data-start=\"1948\"\u003e\n\u003cstrong\u003eOutputs\u003c\/strong\u003e: 4 × 16A, 220 to 250V, IP44 sockets; 2 × 32A, 220 to 250V, IP44 sockets\u003cbr data-end=\"2148\" data-start=\"2145\"\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2326\" data-start=\"1948\"\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e: each output protected by an MCB (Type C)\u003cbr data-end=\"2203\" data-start=\"2200\"\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2326\" data-start=\"1948\"\u003e\n\u003cstrong\u003ePhase split\u003c\/strong\u003e: L1: 1 × 32A; L2: 1 × 32A + 2 × 16A; L3: 2 × 16A\u003cbr data-end=\"2266\" data-start=\"2263\"\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2326\" data-start=\"1948\"\u003e\n\u003cstrong\u003eIP rating\u003c\/strong\u003e: IP44\u003cbr data-end=\"2284\" data-start=\"2281\"\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2326\" data-start=\"1948\"\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 197 × 285 × 290 mm\u003cbr data-end=\"2311\" data-start=\"2308\"\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2326\" data-start=\"1948\"\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 3.2kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PCE","offers":[{"title":"Default Title","offer_id":52103569899862,"sku":"IMST323T\/0-4-2MCB","price":240.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/9030184Ktop_e3f5b655-f4be-4045-8bf2-edd0f1715084.webp?v=1766011761"},{"product_id":"imst-32a-three-phase-thru-to-2-x-32a-4-x-16a-rcbo","title":"PCE IMST Power Distribution Unit 32Amp Three Phase Thru to 2 x 32Amp, 4 x 16Amp RCBO","description":"\u003cp data-end=\"375\" data-start=\"0\"\u003eThis IMST 32A three phase distribution board is a simple, professional way to create multiple safe, protected circuits from a single incoming supply. It is ideal for practical setups where you have a mix of small and mid sized loads, such as temporary work areas, cabins and compounds, exhibition stands, workshop bays, plant rooms, control equipment, and general site power.\u003c\/p\u003e\n\u003ch2 data-end=\"390\" data-start=\"377\"\u003eProtection\u003c\/h2\u003e\n\u003cp data-end=\"747\" data-start=\"392\"\u003eInstead of putting everything behind one device, this unit gives you six separate outlets, each with its own RCBO. That means if one connected item develops a fault or nuisance trip, you only lose that one circuit, not the whole board. It is also a tidy way to avoid background leakage building up across multiple devices and tripping a single shared RCD.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 × 16A outlets, each protected by its own 16A 30mA two pole Type A RCBO (C curve)\u003c\/li\u003e\n\u003cli\u003e2 × 32A outlets, each protected by its own 32A 30mA two pole Type A RCBO (C curve)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-end=\"961\" data-start=\"922\"\u003ePhase split (how the load is spread)\u003c\/h2\u003e\n\u003cp data-end=\"1059\" data-start=\"963\"\u003eTo help keep loading balanced across the supply, the outputs are split across phases as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eL1: 1 × 32A\u003c\/li\u003e\n\u003cli\u003eL2: 1 × 32A + 2 × 16A\u003c\/li\u003e\n\u003cli\u003eL3: 2 × 16A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-end=\"1152\" data-start=\"1120\"\u003eLoop through (through supply)\u003c\/h2\u003e\n\u003cp data-end=\"1386\" data-start=\"1154\"\u003eA 32A three phase loop through outlet is fitted so you can continue the supply onwards to additional distribution boards or equipment. This keeps power layouts tidy and makes it easy to add more distribution without extra splitters.\u003c\/p\u003e\n\u003ch2 data-end=\"1407\" data-start=\"1388\"\u003eRugged enclosure\u003c\/h2\u003e\n\u003cp data-end=\"1749\" data-start=\"1409\"\u003eThe enclosure is shock resistant polyamide, designed to be tough, lightweight and genuinely portable. It has a folding steel carry handle, a stackable design, and the protective devices sit under a clear window so checks are quick and obvious. Rated IP44, it is suitable for real world temporary use where conditions are not always perfect.\u003c\/p\u003e\n\u003ch2 data-end=\"1763\" data-start=\"1751\"\u003eKey specs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-end=\"2160\" data-start=\"1765\"\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e: 32A, 240 to 415V, 5 pin (3P + N + E) IP44 inlet\u003cbr data-end=\"1822\" data-start=\"1819\"\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2160\" data-start=\"1765\"\u003e\n\u003cstrong\u003eLoop out\u003c\/strong\u003e: 32A, 240 to 415V, 5 pin (3P + N + E) IP44 outlet\u003cbr data-end=\"1883\" data-start=\"1880\"\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2160\" data-start=\"1765\"\u003e\n\u003cstrong\u003eOutputs\u003c\/strong\u003e: 4 × 16A, 220 to 250V, IP44 sockets; 2 × 32A, 220 to 250V, IP44 sockets\u003c\/li\u003e\n\u003cli data-end=\"2160\" data-start=\"1765\"\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e: each output protected by an RCBO (Type A, C curve, 30mA)\u003cbr data-end=\"2036\" data-start=\"2033\"\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2160\" data-start=\"1765\"\u003e\n\u003cstrong\u003ePhase split\u003c\/strong\u003e: L1: 1 × 32A; L2: 1 × 32A + 2 × 16A; L3: 2 × 16A\u003cbr data-end=\"2099\" data-start=\"2096\"\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2160\" data-start=\"1765\"\u003e\n\u003cstrong\u003eIP rating\u003c\/strong\u003e: IP44\u003cbr data-end=\"2117\" data-start=\"2114\"\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2160\" data-start=\"1765\"\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 197 × 285 × 290 mm\u003cbr data-end=\"2144\" data-start=\"2141\"\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"2160\" data-start=\"1765\"\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 3.2 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PCE","offers":[{"title":"Default Title","offer_id":52103569932630,"sku":"IMST323T\/0-4-2RCBO","price":360.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/IMST323T_0-4-2RCBO.jpg?v=1775854689"},{"product_id":"125amp-3-phase-distribution","title":"125Amp 3 Phase Distribution","description":"\u003cp data-end=\"1047\" data-start=\"668\"\u003eOur 125A three phase distribution board is built for larger power setups where you need a single incoming supply feeding multiple circuits safely and reliably. It suits site compounds, workshops, plant, industrial maintenance, exhibitions, outdoor installations and temporary power jobs where loads are higher, and the distribution needs to stay dependable.\u003c\/p\u003e\n\u003cp data-end=\"1346\" data-start=\"1049\"\u003eUnlike many Distribution boards that rely on lightweight moulded housings, this unit uses a hard wearing impact resistant polypropylene enclosure chosen for demanding use, with strong chemical and corrosion resistance. It is designed for real handling and transport, not just sitting in a dry cupboard.\u003c\/p\u003e\n\u003ch3 data-end=\"1393\" data-start=\"1348\"\u003eClear, confidence inspiring indication\u003c\/h3\u003e\n\u003cp data-end=\"1613\" data-start=\"1394\"\u003eEvery output has a green LED power indicator so you can see at a glance which circuits are live. A phase rotation indicator is fitted so you can quickly confirm the supply is correct before energising three phase loads.\u003c\/p\u003e\n\u003ch3 data-end=\"1221\" data-start=\"1194\"\u003eTransport and handling\u003c\/h3\u003e\n\u003cp data-end=\"1499\" data-start=\"1222\"\u003eBecause these boards get moved a lot, it’s fitted with proper carry handles for easier handling on site. The handle design also gives you solid ratchet strap points, making it simple to secure the unit during transport without worrying about the enclosure deforming or warping.\u003c\/p\u003e\n\u003ch3 data-end=\"1655\" data-start=\"1615\"\u003eIncoming protection and isolation\u003c\/h3\u003e\n\u003cp data-end=\"1861\" data-start=\"1656\"\u003eThe incoming supply is protected by a 125A four pole device providing overcurrent protection and a clear point of isolation for safe working (ideal when the unit is being moved, serviced, or reconfigured).\u003c\/p\u003e\n\u003ch3 data-end=\"1910\" data-start=\"1863\"\u003eSingle phase outputs, protected properly\u003c\/h3\u003e\n\u003cp data-end=\"2165\" data-start=\"1911\"\u003eAll single phase outputs are protected by two pole Type A RCBO protection, giving RCD protection and overcurrent protection in one device. This is the cleanest way to protect individual circuits and helps reduce nuisance tripping on real equipment loads.\u003c\/p\u003e\n\u003ch3 data-end=\"2239\" data-start=\"2167\"\u003eThree phase output protection options (depending what you select)\u003c\/h3\u003e\n\u003cp data-end=\"2423\" data-start=\"2240\"\u003eThe three phase output can be supplied with different protection options so you can match it to what you are feeding downstream, whether that is a sub board or three phase appliances.\u003c\/p\u003e\n\u003cp data-end=\"2563\" data-start=\"2425\"\u003e\u003cstrong data-end=\"2450\" data-start=\"2425\"\u003eFixed 30mA RCD option\u003c\/strong\u003e\u003cbr data-end=\"2453\" data-start=\"2450\"\u003eA good choice where you want straightforward additional protection at the output with a fixed 30mA trip level.\u003c\/p\u003e\n\u003cp data-end=\"2839\" data-start=\"2565\"\u003e\u003cstrong data-end=\"2606\" data-start=\"2565\"\u003eVariable RCD option (without key bypass)\u003c\/strong\u003e\u003cbr data-end=\"2609\" data-start=\"2606\"\u003eIf you select the Variable RCD option, it uses an earth leakage relay with adjustable trip level and time delay, giving you a practical way to suit different loads and site conditions instead of being locked into a single setting.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable trip sensitivity from 30mA up to 10A\u003c\/li\u003e\n\u003cli\u003eSelectable time delay from instantaneous up to 10 seconds (in steps)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eClear indication when bypass is active, so it is obvious what state the protection is in\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"2947\" data-end=\"2992\"\u003eOutput configuration \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"2995\" data-end=\"3027\"\u003e6 × 16A single phase outputs\u003c\/strong\u003e, protected by\u003cspan\u003e \u003c\/span\u003etwo pole Type A RCBO \u003cspan class=\"\" data-state=\"closed\"\u003e\u003cspan class=\"ms-1 inline-flex max-w-full items-center relative top-[-0.094rem] animate-[show_150ms_ease-in]\" data-testid=\"webpage-citation-pill\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"3109\" data-end=\"3141\"\u003e6 × 32A single phase outputs\u003c\/strong\u003e, protected by\u003cspan\u003e \u003c\/span\u003etwo pole Type A RCBO \u003cspan class=\"\" data-state=\"closed\"\u003e\u003cspan class=\"ms-1 inline-flex max-w-full items-center relative top-[-0.094rem] animate-[show_150ms_ease-in]\" data-testid=\"webpage-citation-pill\"\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"3223\" data-end=\"3253\"\u003e4 × 32A three phase output\u003c\/strong\u003e, protection selectable (including Variable RCD option) \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-start=\"3223\" data-end=\"3253\"\u003e2 × 63A three phase output\u003c\/strong\u003e, protection selectable (including Variable RCD option) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-end=\"3485\" data-start=\"3469\"\u003eKey specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncoming\u003c\/strong\u003e:\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e125A three phase, with four pole protection + isolation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndicators\u003c\/strong\u003e: green LED on each output, plus phase rotation indication\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e: impact resistant polypropylene\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong data-end=\"3651\" data-start=\"3640\"\u003eWeight:\u003c\/strong\u003e\u003cspan\u003e 37\u003c\/span\u003ekg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP rating\u003c\/strong\u003e: IP44\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEarth lug\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor secondary bonding\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Distro Works","offers":[{"title":"Variable RCD","offer_id":52749324091734,"sku":"1253\/0-6-6\/0-4V-2V","price":3400.0,"currency_code":"GBP","in_stock":true},{"title":"Fixed 30mA RCD","offer_id":52749324124502,"sku":"1253\/0-6-6\/0-4R-2R","price":2600.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/125-3DistroWorks.jpg?v=1772664310"},{"product_id":"32a-415v-imst-box-portable-power-distribution-with-rcbos","title":"PCE IMST Power Distribution Unit, 32Amp Three Phase to 2 x 16Amp Three Phase RCBO","description":"\u003cp class=\"p1\"\u003eThis IMST 32A three phase distribution board provides two independently protected 16A three phase outputs from a single 32A supply, offering a safe and practical solution for distributing power on site. It is ideal for temporary event setups, site power, plant equipment, production environments, and workshop use.\u003c\/p\u003e\n\u003ch2\u003e\u003cb\u003eProtection\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp class=\"p3\"\u003eInstead of feeding both outputs through a single protective device, this unit provides two separate 16A three phase outlets, each protected by its own 16A 30mA four pole Type A RCBO (C curve). This means if one connected load develops a fault or trips, only that circuit is affected, keeping the second output live and operational. It also helps prevent cumulative leakage issues that can occur when multiple loads are placed behind a single shared RCD.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cb\u003eRugged enclosure\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp class=\"p3\"\u003eThe enclosure is shock resistant polyamide, designed to be tough, lightweight and genuinely portable. It features a folding steel carry handle and a stackable design for easy transport and storage. The protective devices sit behind a clear window, allowing quick visual checks on site. Rated IP44, it is suitable for real world temporary use where conditions are not always perfect\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cb\u003eKey specs\u003c\/b\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e: 32A, 240 to 415V, 5 pin (3P + N + E) IP44 inlet\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong\u003eOutputs\u003c\/strong\u003e: 2 × 16A, 240 to 415V, 5 pin (3P + N + E) IP44 sockets\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e: each output protected by a 16A 30mA four pole Type A RCBO (C curve)\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong\u003eIP rating\u003c\/strong\u003e: IP44\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.6kg\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 300 × 300 × 200 mm (H × W × D)\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Distro Works","offers":[{"title":"Default Title","offer_id":52927341461846,"sku":"IMST323\/0\/2RCBO","price":270.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/IMG_2222.heic?v=1774355726"},{"product_id":"32a-415v-portable-power-distribution-32amp-three-phase-to-6x-13amp-over-three-rcbos","title":"32A 415V, Portable Power Distribution, 32Amp Three Phase to 6x 13Amp over three RCBOs","description":"\u003cp class=\"p1\"\u003eOur 32A three phase distribution board is built for practical power setups where you need a compact, reliable way of taking a single incoming supply and creating multiple protected 13A circuits, without losing the ability to feed further distribution.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eIt is well suited to workshops, production environments, site cabins, control equipment, test areas, exhibitions, temporary installations, and general industrial or maintenance use where a tidy, self-contained distribution point is needed.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eRugged, transport friendly construction\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp class=\"p3\"\u003eThe enclosure is manufactured from impact resistant polypropylene, selected for hard wearing use with good resistance to chemicals and corrosion. The design keeps connections protected and organised, while remaining lightweight and easy to handle on site.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003eFixing points are built into the enclosure, allowing the unit to be securely mounted where required, whether that is on a wall, frame, or within a larger installation. This makes it equally suited to semi permanent setups as well as portable use.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003ePractical output layout\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp class=\"p3\"\u003eThis unit takes a 32A three phase supply and distributes it across six 13A outlets, split over all three phases. Each pair of outlets is protected by its own RCBO, providing three independently protected circuits.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003eA 32A three phase loop through is included, allowing additional boards or equipment to be fed directly from the same supply without the need for separate splitting or additional connectors.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eSingle phase outputs, protected properly\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp class=\"p3\"\u003eEach pair of 13A sockets is protected by a 30mA Type A RCBO, combining residual current and overcurrent protection in one device.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003eThis arrangement provides:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"p1\"\u003eproper fault protection on each section\u003c\/li\u003e\n\u003cli class=\"p1\"\u003ereduced risk of nuisance tripping across multiple loads\u003c\/li\u003e\n\u003cli class=\"p1\"\u003eimproved fault isolation, so a trip only affects part of the board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p3\"\u003eThe outputs are distributed across L1, L2 and L3, helping to balance load in mixed use applications.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eBuilt for real world conditions\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp class=\"p3\"\u003eThe unit is rated IP44 when the socket covers are closed, making it suitable for environments where conditions are not always perfect. As with standard 13A outlets, ingress protection is not maintained while plugs are inserted.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003eA clear layout and straightforward connection arrangement make the unit easy to integrate into both temporary and fixed setups.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eIntended use\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp class=\"p3\"\u003eThis product is designed for use in temporary, industrial, and commercial power distribution systems where appropriate upstream protection is in place and installation is carried out by a competent person.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eKey specs\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong\u003eInput\u003c\/strong\u003e: 32A three phase 415V (5 pin)\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong\u003eLoop through\u003c\/strong\u003e: 32A three phase (unprotected)\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong\u003eOutputs\u003c\/strong\u003e: 6 × 13A UK sockets\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong\u003eProtection\u003c\/strong\u003e: 3 × 30mA Type A RCBO (each protecting two sockets)\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong\u003ePhase distribution\u003c\/strong\u003e: outputs split across L1, L2 and L3\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong\u003eEnclosure\u003c\/strong\u003e: impact resistant polypropylene with integrated fixing points\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong\u003eIngress protection\u003c\/strong\u003e: IP44 when socket covers are closed\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: temporary, industrial and workshop power distribution\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e\n\u003cstrong data-start=\"2793\" data-end=\"2808\"\u003eDimensions:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e535 × 200 × 160 mm (height × width × depth)\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong data-start=\"2857\" data-end=\"2868\"\u003eWeight:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e4.6 kg\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Distro Works","offers":[{"title":"Default Title","offer_id":52940915376470,"sku":"323\/6RCBO","price":360.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/files\/IMG_4503.jpg?v=1774463374"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0979\/1740\/3478\/collections\/DistroWorks500APowerlocktypeA1_a467b918-815c-4a58-99fa-416aac12c8d7.webp?v=1766884088","url":"https:\/\/distroworks.co.uk\/en-eu\/collections\/three-phase-distro.oembed","provider":"Distro Works","version":"1.0","type":"link"}